Accord of the Month Nominations: July 2007

[87accordlxi]

YOU MUST PROVIDE A MOD LIST, A DETAILED PARAGRAPH, OR A LIST OF WORK DONE TO THE VEHICLE YOU ARE NOMINATING.

Its time to nominate your favorite ride for AOM: July 2007

Check out the Rules & Regulations

How to Nominate a Vehicle for AOM

All winners in the past year are ineligible for nomination:

July 06 - 88LXi68
August 06 - Bullard123
September 06 - Toneloc5145
October 06 - Cheeseburger
November 06 - TWOLOUDANDPROUD
December 06 - mkymonkey
January 07 - thegreatdane
February 07 - picopop
March 07 - Versanick
April 07 - 87AccordLXsdn
May 07 - RobT5580
June 07 - Legend_master

Members must have 50 posts in order to nominate someone

Duplicate nominations will be deleted


Posts made that are not nominations will be deleted

Invalid nominations will be deleted

There is no need to second a nomination! If a nomination is valid, it will proceed to the voting stage automatically.

[forrest89sei]

I Nominate Messyhonda

MessyHonda


(his LX-i)
Engine Specifications:
Stock A20A3 with 142k
Custom Adjustable Cam gear
koyo High flow radiator
Teg 90-93 red CAI
MSD blaster 2 coil
Crane 11mm red wires
NGK v-power plugs
4g map sensor

Coming soon:
Pacesetter Ceramic headers 4-2-1
Bored out TB

Drivetrain:
5 speed manual
new clutch at 113k

Coming soon:
Custom Short Shifter with poly bushings.

Exhaust
Coming soon:
Pacesetter Ceramic headers 4-2-1
Magnaflow high flow cat
2.25inch pipe with magnaflow muffler.

Suspension, wheels & tires:
Front: EBC dimpled and sloted rotors with AEM pads
15inch Fat fives
Falken tires 512 195/60/15
DC front strut bar
Tokico struts
Rear: Powerstop rotors with AEM pads
SE-i SS brake lines
SE-i rear disk conversion
Justins rear sturt bar

Coming soon:
lowering springs
poly bushings in the front

Interior:
Prelude 4ws steering wheel with leather wrap
SE-i armrest
SE-i cupholders
JDM Map light(not installed)
OEM foglight switch(not installed)

coming soon:
PP Guages with white face
bezel
newer shiftknob and boot
OEM foglight switch
Ice
Pioneer Premier tape deck 35wx4
Pioneer 6 cd changer
kicker 6.5 fronts
almani 6*9 rears
audiobahn amp
2 10 inch kickers

Exterior:
20% tint in the back 35% in the front.
Sylvania Silverstar lights
JDM corners

coming soon:
rear mud flaps
4g spoiler
Clear bumper lights
LEDs in all the front.
might take out all dents and paint it accord 07 color

[forrest89sei]

I also Nominate Catalyst for his awesome 1987 Accord LX-i Hatch

List of mods:
-Cat back exhaust with 2.25 mandrel bent piping, and a magnaflow XL series muffler, no resonator.
-Prime 15in 5 spoke aluminum alloy wheels
-Kumho Ecsta Tires
-Newly painted Hood, Headlight covers, grill, eyebrows, bumpers, trim, and other misc. parts.
-Sounds System : Kenwood deck, 4 6in. Rockford Fosgate punch series component speakers.
-8mm spark plug wires, with NGK V-power spark plugs.
-Other than that, shes stock.

[reanimator420]

id like to nominate steve si
mods
2.0 si
b20a
oem lip
f1 interior swap
gsr fat fives
prelude power folding fogs
oem rainvents

[Legend_master]

2DrSE-i

Engine
A20A3 California Emmissions Automatic
90-93 Integra Full Cold Air
9mm NGK Ignition Wires
NGK V-Power Spark Plugs
2.25" Bender's Custom Cat Back Exhaust
2.25" Magnaflow Muffler
Catalytic Convertor Removed
7x2.25" Resonator

Suspension
SE-i Rear Brakes
14" Honda Accord SE-i Wheels
ST Front Sway Bar
ST Rear Sway Bar
Prothane Front Lower Control Arm Bushings
Prothane Front Shock Bushings
Prothane "Radius Arm" Bushings
Justin's Front Strut Bar
Koni Special "Reds", Front and Rear
Tokico Sport Springs, 1" Drop

Interior
Reverse Indiglow Guages
Kenwood Head Unit
Rockford Fosgate Front 6.5" Speakers
Pioneer Rear 6x9" Speakers
SE-i Cupholder
SE-i Arm Rest
SE-i Leather Seats
Exterior
Hella H4 Conversion Headlamps
Clear Corner Lights
Clear Turn Signals
5% Tint on all Windows

[Legend_master]

Frantik







Stock Specifications:
Honda A20A3 2.0 FI
5 speed manual transmission
Monterey Green Metallic Clearcoat exterior
Ivory with Black interior
Engine:
Custom 2.5" CAI
NGK V-Power spark plugs
NGK spark plug wires
Suspension:
Koni Specials (red) adjustable shocks up front
Tokico HP (blue) shocks in the rear
Eibach Sportline lowering springs (advertised at 1.4", seems lower)
Justin's front upper strut tower bar
Justin's rear strut tower bar
Geo Storm 14x5.5 6 spoke machined alloy/black wheels. (14 lbs each)
Interior:
OEM armrest
OEM equalizer
OEM head unit w/ custom audio-in for iPod
Exterior:
OEM vent shades
OEM moonroof visor
OEM fenderwell trim
OEM 89 Integra RS lip
JDM corners
Custom smoked-reflector bumper signals
Sylvania Silverstar sealed beam headlights
Suntek HP 50% tint on front side windows
Suntek HP 30% tint on rear side windows
Suntek HP 15% tint on back glass

[Cheeseburger]

Wickedaccord

-benson's 2.0 resleeved GSR block, fully balanced and blue printed by bensons machine, cp pistons, manley rods, 9:1 compression
-PnP b16 head/multi angle valve job
-ctr cams
-hondata i/m gasket
-str 68mm t/b
-skunk springs/retainers
-hondata s200b p30 ecu
-LSD cable tranny
-full race stage3 GT turbo kit (GT35R)
-custom 3 inch exhaust
-itr cams
-itr manifold

A fantastic 409whp at a mere 12psi, at 17psi, it made giant mid range power. Top end dropped off because the injector size are too small. We should've gotten 750cc injectors, but no one expected this amount of power at just 12psi. 486whp could've easily been achieved with 750cc injectors. Possibly just a little over 500whp. Another problem was due to clutch slippage. Again, no one expected these numbers. So a stage3 exedy clutch was opted for. Now we have to get an exedy twin plate with flywheel.









VIDS:
http://keruh.com/3gz/wickedaccord_dyno.mov
http://keruh.com/3gz/wickedaccord_civic.mov
http://keruh.com/3gz/wickedaccord_civic2.mov
http://keruh.com/3gz/wickedaccord_cruisin.mov