Results 1 to 1 of 1

Thread: 82-85 Accord Performance Modifications FAQ

  1. #1
    2ndGenGuy
    Guest

    82-85 Accord Performance Modifications FAQ

    With the increasing number of members here lately, I figured we should put together a nice organized thread with a performance "mods" list for 2nd gens. I'll need suggestions to add to this, and I'll add them to the main post when you suggest them. This is all out of my head, so if you see any errors please let me know so I can fix it!

    Detailed Sections will be broken off into their own FAQ thread and linked from here (such as the rear disc conversion).


    Suspension

    Springs
    Spax Springs (1.3 inch drop)
    http://www.spaxperformance.com/

    King Springs (1.5?? inch drop)
    http://www.kingsprings.com/

    Eibach Pro Kit (1.3 inch drop) EIB-4023.140
    Discontinued

    B&G Springs (1.6 inch drop)
    Discontinued

    Suspension Techniques (Drop Unknown) S-052B-FR
    Discontinued

    Ground Control Coilovers (Adjustable Height)
    Rumored to exist and have been discontinued

    Shocks
    Koni Internally Adjustable
    http://www.classicgarage.com (New Old Stock, Discontinued)

    Koni Externally Adjustable Rears From 2g Prelude
    Discontinued, occasionally show up on eBay.

    See the Koni Part Number FAQ: https://www.3geez.com/forum/2geez-tech-performance/54639-koni-part-numbers.html
    And install HowTo: https://www.3geez.com/forum/2geez-tech-performance/58060-2g-koni-eibach-install.html

    Swaybars
    Swaybars appear to differ between 82-83 and 84-85 models due to a possible track width increase in 1984.

    Addco Swaybars
    http://www.addco.net (Possibly Discontinued, stock seems to be dwindling)

    Whiteline Swaybars
    http://www.whiteline.com.au (Expensive shipping from Australia, need to find North American distributor)


    Honda OEM Rear Swaybar
    If your 2nd gen came with no rear swaybar, the 84-85 LX Hatchback came with a rear sway that might work on base models. The 85 SEi also has a rear swaybar that will fit sedans if you also use the SEi control arms.

    Engine

    Aftermarket Carbs
    Weber Progressive Kit (DGEV 32/36)
    http://www.piercemanifolds.com
    http://www.carbsunlimited.com
    http://www.redlineweber.com


    Make sure you specify if you have an 82-83 or 84-85 engine! Adapter plates are completely different and are not compatible!

    HowTo is nearly identical to the 3rd gen: https://www.3geez.com/forum/frequently-asked-questions/38161-weber-32-36-34-38-a.html

    For custom carbs, same principles apply, manifold modifications recommended to supply fuel to CVCC auxiliary chambers.

    Exhaust
    1982-1983 Accords
    Some headers have been seen on eBay for the 82-83 EK1 engine. 1981 and earlier EK1 headers will not fit. More information is needed.

    1984-1985 Accords
    Any 4-2-1, or shorty 4-1, header from a 2nd gen Prelude, or 3rd gen Accord will also fit the 84-85 Accords with the ES, ET or EZ motors. These will require modifications to emissions control systems, and probably will not bolt to the factory exhaust system. Welding to the factory exhaust will be requred, EGR and air suction systems will either need to be deleted, or pipes modified to reconnect properly to the new header.

    Available exhausts are listed in the 3rd gen section here:
    https://www.3geez.com/forum/showthread.php?t=37261

    The only ones that won't fit are any of the 4-1 long tube headers. These do not have enough clearance between the front crossmember and header. The 4-2-1's are very close as it is, and some people report that they hit slightly when the engine rocks which may require some crossmember grinding.

    Camshafts
    1982-1983 Accords
    Colt Cams will do custom grinds on these camshafts. Cams are not interchangeable with earlier pre-1982 EK1 engines due to port layout change. Other companies listed in the 3g Accord camshaft FAQ may do grinds on this cam as well.
    http://www.coltcams.com

    1984-1985 Accords
    Not many people (anybody?) has done camshafts for these cars. I suspect a 2g Prelude with a 1.8 motor will have a slightly more aggressive cam for a bit more power. Colt, Delta and anybody who does grinds for 3rd gens should be able to grind a cam for a 2g Accord. A cam spec from a 3g should yield similar results in the 2g Accord.

    If you have an 84-85 Accord with CVCC (ES2 motor), your only swappable, OEM cam will be from a 2g Prelude with CVCC as well (ES1 motor). If you have a non-CVCC motor (ES3, EZ or ET), A20 cams and A18 Carb'd cams might be options. A custom grind is highly recommended though. Look to 3g Accords for grind specs.

    For any motor, the most common mild grind is a grind somewhere around 270. Typically it offers the best streetability, and good top-end power increase.

    3rd Gen Accord Camshaft FAQ:
    https://www.3geez.com/forum/frequently-asked-questions/37583-camshaft-regrinds.html

    Engine and Head Swaps
    This is actually pretty extensive. I'll get to this later.

    Transmission Swaps
    See gear ratios here: https://www.3geez.com/forum/2geez-accords/59778-2g-gear-ratios.html

    Any 1.8 liter Prelude transmission (ES1 or A18) will bolt into a 2g Accord directly.

    A20 transmissions will bolt to the motor, and allow usage of bigger flywheel and clutch, but it has bigger driveshaft splines. You'll need A20 starter and '85 SEi axles and hubs or see the Axle Swap Info thread here: https://www.3geez.com/forum/2geez-accords/51211-axle-swap-info.html

    The A20 transmission swap provides no known benefit aside from possibly being slightly stronger. Gear ratios are about the same as carb'd ES2 transmissions.

    Brakes

    Front
    Front brakes can be swapped from 86-87 Accords. They have slightly thicker rotors and bigger pads and calipers. All you need are the rotors and calipers. This also means that the JDM F1 Edition Accord two-piston calipers bolt right in. They also use the same pads as the rest of the 86-87 Accords. You may need to modify (bend or remove) the backing plates so they don't rub on the thicker rotors.

    Rear
    Rear discs from the 2g Prelude (DX or Si) swap directly on to the rear spindles. HowTo Here:
    https://www.3geez.com/forum/2geez-accords/50191-2gee-rear-disk-conversion.html
    Last edited by 2ndGenGuy; 06-24-2009 at 10:16 AM.



Similar Threads

  1. Need help w/ 87 accord performance
    By FF37 in forum Performance
    Replies: 2
    Last Post: 04-09-2012, 03:44 PM
  2. modifications to the pcv system?
    By lostforawhile in forum Restoration & Custom Fabrication
    Replies: 25
    Last Post: 05-08-2009, 08:47 PM
  3. Let the modifications begin...
    By SexyEroticIndividual in forum Interior & Exterior Care
    Replies: 47
    Last Post: 03-09-2005, 05:03 AM
  4. Header & Intake / Modifications
    By HondaNut in forum Performance
    Replies: 29
    Last Post: 12-09-2003, 10:30 PM
  5. Modifications Questions
    By DriverOnAcid in forum Performance
    Replies: 3
    Last Post: 02-21-2003, 07:54 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
VigLink badge