- Intake Air Temp. Gauges Worth It?
- good header info from S&S headers (R.I.P. 2010)
- side exit exaust
- new s&s header
- Air Box Mod?
- Delete or not to delete the EGR sys.
- replacing the in tank pump
- a20 and es3 crank/rod/piston spec?
- discussion on manual transmission cooling
- Lizardskin Equivalent for $10?(Ceramic Coating)
- flat face valves
- *Guy's with J.D.M B20 Series Motor*
- A20 Engine Build Research for Rhonda And Shelly
- oversize pistons?
- 4th gen subframe
- Prelude brakes
- finally found a better place to mount the MSD box
- ignition coil
- a20a3/4 pistons?
- A20XX Cam Gear!
- question on delta stage 2 cam
- orientation of charcol canister
- 1981 1751cc EK1 Performance Questions
- B-series intake question
- Modification, Battery moved to front passenger floorboard.
- Water vapor injection project
- A20 LSD 5Spd
- Gauges
- connecting rods
- bisimoto A20 valves
- clutch release spring.
- forget an adapter for a later model dizzy............
- How To Upgrade Your Front Sway Bar Linkage Bushings To Polyurethane
- d series head on a a20 block?
- Mods for resale value
- Rear control arms and other things.
- awd accord has it been done
- Modernizing the 3gee.
- Adding cut off (kill) switch to your Accord
- 1989 honda accord Bedliner, and front lip spoilers
- Proper harness
- EF JDM Headlight Washers onto CA Accord
- Coil on plug (COP) discussion
- Parts cross reference for SE-i proportioning valve
- Stock A20/A18 valve dimensions
- ISO: Useless Knowledge (81 Accord EK1)
- fabrication pics. post you're best and worst moments
- Watsons streetworks LED headlights
- CJS wiring OBD1/Vtec B swap wire harness.
- f20c 86 accord hatch
- 86-89 Accord hood strut conversion Diy
- Looking for help to restor 88 Coupe Lxi
- Need a NEW prop valve
- Best way to restore bumper & side moulding color
- Custom rear bumper for 84 Hatch
- Why double flare fittings suck
- What's the Real Way to Rehabilitate Faded Trim and Moldings?
- INO Brown Glovebox
- Air Box Door Reseal
- New Accelerator Cable
- How to coil on plug / coil near plug with hondarulez coil on plug controller part 1
- I need help with my engine!
- Shift linkage needed
- 3D Printed Parts Discussion Thread
- Your Guide to Trim Restoration
- Catastrophic rust and mangled pinch rails
- Cowl Cover Rehab
- Rear subframe 1986 accord
- helpppp
- Engine Resto-Modding 2G prelude