Pelude Si fog lights

[mint89]

I was out a local Pick & pull. and ran across these lights. I geuss i will put them the the shed until i find a use.
6229

[Calabek]

Damn good find :)

[mint89]

Honda Accord Fog Lights Kit Set 1986 1989 Rectangular Covers New | eBay (http://www.ebay.com/itm/OEM-Honda-Accord-Fog-Lights-Kit-Set-1986-1989-Rectangular-Covers-NEW-NOS-/321468875494?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1989%7CMake%3AHonda&hash=item4ad909c2e6&vxp=mtr)

[mint89]

hello all



I know this qustion has been asked time and again. I picked up some auto Si fogs from local junk yard. ( Prelude SI)I have most of the wiring harness, but its not complete. it includes connections to lights, the relay, ground wire and three groups of leads. one set has two wires: yellow/green and red blue. I think these are the switch leads. the two others groups coming of the harness have 3 leads each. red/white, red/greem and red/blue. they are the same colors for both of these groups. I also have a oem accord switch with the foglight emblem and red dot botton. on back are three contacts one clearly marked ground. back to the harness. I dont know were the three lead groups should go or how to wire them for my 89 honda lxi,


Pease help.


64656468
64666467

[Hazwan]

Your best bet would be testing each leads and see where it goes with a multimeter. But the switch connection should be GND, fused +12 and one connects to the relay. I know there are ground, constant +12v for the folding motor and switched +12 from the relay for the bulb at the fogs itself.

What are the wire colors that came out the loom near the fogs and the relay? Close up pics of each connections would help too

[mint89]

652365246525

this is what i have found out: the red/black wire passes power thought relay and on to the lights, yellow/green goes streight to the covers. red/ white & red/green goes to the relay coil. the red/blue I have no ideal what its for.

why is the red/white, red/green & red/black spit into two openning in the harness?
which ones go to the switch? ...

I played will the lights and one work perfectly, but the other lags behind and does not comeplete the openning allowing the light to come on. if i switch the plugs they act the same way, same lead laging behind and felling to follow though completely. I believe both will work properly if the set up is correct.

can anyone help?