I need help a20a ecu to b20a engine

[BOLINKXR-89LXI]

A few questions for you guys Im about to start my b20a swap my plain was to use the a20a ecu with the harness and intake on my a20a engine .now I would like to have the full power of the b20a but I need the ecu or get my tuned up to try to mach the b20a ecu and that is going to cost me about $350 dollars

1. if I do find the b20a ecu will it work on the harness in the car ?

2. if I get mine tuned up what specs do I need to give them ?

3. what is the max rpm for a stock b20a?:wave: :smokin:

[carotman]

The Max RPM is 6500

You can use the JDM ECU, the A20A ECU, or the B20A5

[YK86]

1)You need to add a few wires to the plug since the B20A uses a couple sensors the A20 doesn't use. I'll post the pin locations when I find time. Have you thought about what Carotman is doing and using the 3rd gen Prelude ECU??
2)???
3)Not sure
4)You asked this in a different thread but I found that the A20 auto starter fits the B20A 5 speed tranny I have.