New throtle body

[AccordLxi88]

Is there a aftermarket Throtle body or one of a different car that is better than ours and will bolt on with no problems. I heard I could pull 1 off a lude but i dont know if it will work. If anyone knows please let me know.

[Johnny O]

I am not sure but maybe and older interga, if not Gude will inlarge it for u.

[1988starter]

I am going to measure the TB off my sisters 86 lude si a20 and see if it different from my 8 LXi but her engine only produces 110 hp. I know the gaskets are the same.

[maka_RTH]

Originally posted by AccordLxi88
Is there a aftermarket Throtle body or one of a different car that is better than ours and will bolt on with no problems. I heard I could pull 1 off a lude but i dont know if it will work. If anyone knows please let me know.
if you wanna get a new intake manifold as well and drill a couple holes, then sure, a B-series will work (correct me if i'm wrong... i don't wanna screw someone over...)

[smufguy]

the one off of the earlier ludes (B20A5) are almost the same as the 3g (88-89) one. i really wont suggest going on an after market intake manifold of throttle body, but if ur going turbo like Justin, i think Edlebrok makes one or one that u can modify cause thats what justin has. if you really want a differet manifold, go with the the B series one and the one that fits in can be dug up from the FAQ.

[3rdGenMartyr]

will a b20 lude boddie fit on the cord manifold, anyone got specs on diameter?

[TWOLOUDNPROUD]

I Have some one here in Ca that does Throtle body Boreing you can only go 68mm on it but it makes a BIG difference it Cost about $275.00 if you want a phone number E mail [email protected]

[AccordEpicenter]

86-87 tbs are different than 88-89, because 88-89 has provisions for the eacv, 86-87 dont, and the tps sensor plug is different i believe too...