Pioneer

[Metro]

I'm working on rebuilding my hole thrunk, This pic is were I am now, but it's a long way to go...

http://home.no.net/mfborge/images/accord/Accord_42.jpg

This two pioneer 12" sub's are powered thru a 1800W Power Acustiqe Gothic amp 2-channel, the condensor is DLS 1 farad...
Head unit is pioneer MP3 player DEH-P7400MP and four other pioneer speakers.

Later I'm gonna change out the amp I have to Pioneer Power amp PRS-X720, and for the other speakers I'm gonna buy the Pioneer PRS-X340...

[shepherd79]

nice,
i am about to do same thing to the floor, but i want to use something light. i don't want to add too much weight. how thick is the plywood on your floor?
are you going to upholster the box and floor?
how much are you going to push into those subs?
i hope those are DVC and you are runnign them in 2ohm load.
Looks nice.

[jigga225]

noooooooo! dont use wafer board.
make a hinge-like part so youcan still get to your spare

[shepherd79]

well, i am gonna do the floor with a door for the spare tire. because i know, as soon as i take my spare out i will blow the tire.

[Metro]

Those are DVC and I'm running them in 2 ohm...
The plate is 22mm thick

And I do not have any tire there, and on a trip, it did turn flat!
maybe I'll do as shepherd79, but I'm gonna have the amps over there so it's gonna be hard anyway...