PDA

View Full Version : cv shaft or axle shaft question


buzzbomber88lx
12-18-2002, 03:37 PM
how much is the cheapest axle shaft for the passenger side. I am getting really tired of hearing click click click. It does it every time I turn. Doesnt even matter wich direction!
Mike's89AccordLX
12-18-2002, 04:07 PM
Well if it doesn't matter which direction then you're going to need drivers side and passenger side. try www.nopi.com check their online catelog.
doug
12-18-2002, 04:27 PM
mine cost 64 bucks
ACCORD EX
12-19-2002, 12:42 AM
try to get those life time warranty shafts !

MIKE
kevins89lxi
12-20-2002, 05:52 AM
How do you get the drive shaft off the car the 32mm nut is impossible to get off the wheel!!!!!!
89lxi95zx7
12-20-2002, 07:50 AM
I SAW 1 ON EBAY A WHILE BACK FOR LIKE $35
ACCORD EX
12-20-2002, 08:13 AM
Originally posted by kevins89lxi
How do you get the drive shaft off the car the 32mm nut is impossible to get off the wheel!!!!!!

not impossible but very fuckin difficult ! it got the shit out of me to loosen it !

i used a socket ( used in loosenning trucks wheels ) and a 2 mm bar which i hang ove it to loosen it !

BTW i did it at a trucks wheel shop ! and then tighened it ith my socket till i reached home !

MIKE
markmdz89hatch
12-20-2002, 12:42 PM
check ebay, I saw the pair out there real cheap
markmdz89hatch
12-20-2002, 12:44 PM
hey Buzz, actaully are you 5spd or auto?
buzzbomber88lx
12-22-2002, 07:38 AM
My car's a 5spd
dirty89lx5sp
12-24-2002, 08:36 AM
I changed the passenger side CV joint and axle...that nut is a bitch...but make sure that you have a torques wrench handy when you put it back on...if it's the nut I'm thinking of...you will need to torque it to 120 (check for right specs) also a fork puller and an extra set of arms is recommended as getting the threads to line up properly in the tranny is tough as well as pushing it in with enough pressure to get by the spring washer thingy (I know not a very techy thing to say, but true).