PDA

View Full Version : My new project 86 accord DX, automatic



2ndTimeHondaOwner
02-21-2015, 09:43 PM
My new to me but old 86 accord. It's a DX, automatic, has the (BS) a20 I believe and 150,xxx ish on it. Not a bad deal for $300http://imagizer.imageshack.us/v2/150x100q90/673/5oCkFk.jpg (https://imageshack.com/i/ip5oCkFkj)
http://imagizer.imageshack.us/v2/150x100q90/909/Py07Fm.jpg (https://imageshack.com/i/p9Py07Fmj)
http://imagizer.imageshack.us/v2/150x100q90/661/qqo88D.jpg (https://imageshack.com/i/idqqo88Dj)
http://imagizer.imageshack.us/v2/150x100q90/540/yTsFUD.jpg (https://imageshack.com/i/f0yTsFUDj)
http://imagizer.imageshack.us/v2/150x100q90/901/27eyQt.jpg (https://imageshack.com/i/p127eyQtj)
As of now it just had the Weber carb put on but more to come. Saving money for a K-Sport coilover kit

2oodoor
02-23-2015, 05:17 PM
Welcome and not bad not bad :)

88Sleeper
03-07-2015, 08:50 PM
Lmao, very nice, you've already got a weber, that's like a $400 item you don't have to deal with, right there =)

2ndTimeHondaOwner
03-07-2015, 09:42 PM
Lmao, very nice, you've already got a weber, that's like a $400 item you don't have to deal with, right there =)
Yep, it's the Weber I had on a first gen civic when I was in high school. Just had to buy a new plate set for the 86 cord.

2ndTimeHondaOwner
03-07-2015, 09:45 PM
Just put in a new distributor bearing and seal today

Dr_Snooz
03-08-2015, 08:18 AM
Not a bad deal for $300. How's the interior?

2ndTimeHondaOwner
03-08-2015, 07:47 PM
The interior is in real good shape and not one crack in the dash even. It's a bit on the dirty side but nothing a little tlc can't fix. The previous owner used it as a "get to work car" and never once cleaned it not to mention only one oil change in 2 1/2 years. I work with him and he told me a bout every little problem the car has. Gave him $300 cash and only seen the car come and go from work hadn't even sat in it or looked under the hood. Sometimes when you love something ya just know lol

Juggalo88Accord
04-24-2015, 07:16 AM
300 bucks nice find bro I'm subscribing to this thread

2ndTimeHondaOwner
05-11-2015, 08:00 PM
The accord is dead! The rebuilt 32/36 Weber is not wanting to work anymore. Took it apart re cleaned it, made sure everything was ok and it worked again for about a week. Then said... screw this, I'm out! So now I'm without a 3G till I can fix it. Not to worry tho... My NEW Original European 38/38 Weber will be here in four days, just in time for the weekend... Can't wait :nervous: I'll try to remember ta take some pictures of the install but for sure will have some after it's done. Or it didn't happen :rofl:

87roach
05-12-2015, 04:44 PM
I hope the new one works out better for you! A bit of an upgrade too :D

2ndTimeHondaOwner
05-16-2015, 10:30 PM
The 38/38 Weber and other parts haven't came in yet, so I removed the mani to work on it and started some non needed electrical component/wire removal. Going to fix the oil filter base plate oil leak while the mani is off and a new o-ring for the water pipe.
http://imagizer.imageshack.us/v2/150x100q90/661/c8ak7N.jpg (http://imageshack.com/f/idc8ak7Nj)
http://imagizer.imageshack.us/v2/150x100q90/908/6xe05P.jpg (http://imageshack.com/f/p86xe05Pj)
http://imagizer.imageshack.us/v2/150x100q90/913/6Eg8lK.jpg (http://imageshack.com/f/pd6Eg8lKj)
http://imagizer.imageshack.us/v2/150x100q90/661/zMvtr5.jpg (http://imageshack.com/f/idzMvtr5j)

Oldblueaccord
05-17-2015, 03:06 PM
The accord is dead! The rebuilt 32/36 Weber is not wanting to work anymore. Took it apart re cleaned it, made sure everything was ok and it worked again for about a week. Then said... screw this, I'm out! So now I'm without a 3G till I can fix it. Not to worry tho... My NEW Original European 38/38 Weber will be here in four days, just in time for the weekend... Can't wait :nervous: I'll try to remember ta take some pictures of the install but for sure will have some after it's done. Or it didn't happen :rofl:

You carbs guys should take a look at Vapor blasting.


There is a guy here at work redoes old motorcycles. he showed me one of the 2 carbs he did it was like day and night difference. He claims there is no damage to the material.

2ndTimeHondaOwner
05-17-2015, 05:10 PM
You carbs guys should take a look at Vapor blasting.


There is a guy here at work redoes old motorcycles. he showed me one of the 2 carbs he did it was like day and night difference. He claims there is no damage to the material. Just watched a video where they blasted a piston. Thing looked brand new after, thanks for the tip. Maybe that could save the 32/36 but this was a good excuse to get the 38 lol

2ndTimeHondaOwner
05-20-2015, 03:58 PM
After removing
http://imagizer.imageshack.us/v2/150x100q90/540/IzVVDt.jpg (http://imageshack.com/f/f0IzVVDtj)
This is all the harness that I'm going to have left going to the engein
http://imagizer.imageshack.us/v2/150x100q90/661/jYJd8N.jpg (http://imageshack.com/f/idjYJd8Nj)

Dr_Snooz
05-24-2015, 02:50 PM
and a new o-ring for the water pipe.

If you're trying to fix a leak, be sure to do a real good visual inspection of that pipe before installing. Over time, the pipe gets eaten away and a new o-ring doesn't help. I think I finally fixed my leak after smearing RTV all over everything. I can tell you that it's a lot harder to fix the leaks after you've put the whole engine back together.

Doh.

2ndTimeHondaOwner
05-24-2015, 08:08 PM
If you're trying to fix a leak, be sure to do a real good visual inspection of that pipe before installing. Over time, the pipe gets eaten away and a new o-ring doesn't help. I think I finally fixed my leak after smearing RTV all over everything. I can tell you that it's a lot harder to fix the leaks after you've put the whole engine back together.
Thanks for the heads up. Easier is always better lol

2ndTimeHondaOwner
05-24-2015, 08:12 PM
Got my new corners today from eBay, not bad for under $30
http://imagizer.imageshack.us/v2/150x100q90/911/DZdjFJ.jpg (http://imageshack.com/f/pbDZdjFJj)
Also almost done with the wire project I'm doing. Just a few ends to finish
http://imagizer.imageshack.us/v2/150x100q90/673/QHuPzp.jpg (http://imageshack.com/f/ipQHuPzpj)

2ndTimeHondaOwner
05-31-2015, 08:18 PM
http://imagizer.imageshack.us/v2/150x100q90/537/nnPz7g.jpg (http://imageshack.com/f/exnnPz7gj)38/38 Weber is on and working great and the new side marker lights look pretty good.

Jobany
06-07-2015, 04:05 PM
Damn, back in january i got the same car for 400$ :D ! Hope to see more from your car man

2ndTimeHondaOwner
06-07-2015, 04:27 PM
http://imagizer.imageshack.us/v2/150x100q90/540/oY3Tnc.jpg (http://imageshack.com/f/f0oY3Tncj)
http://imagizer.imageshack.us/v2/150x100q90/913/1FkYbV.jpg (http://imageshack.com/f/pd1FkYbVj)
http://imagizer.imageshack.us/v2/150x100q90/910/teLtyg.jpg (http://imageshack.com/f/pateLtygj)
Well not what I'd like to be showing but this weekend I was cut off. I did manage to save the body/bumper from any damage yet the tire kissed the curb :mad:

2ndTimeHondaOwner
06-07-2015, 04:30 PM
Damn, back in january i got the same car for 400$ :D ! Hope to see more from your car man
Cool deal on your car and as time and money allows I'll be posting more pics. Still have some of the Weber 38/38 install that I need to get on here

Juggalo88Accord
06-10-2015, 02:47 PM
http://imagizer.imageshack.us/v2/150x100q90/540/oY3Tnc.jpg (http://imageshack.com/f/f0oY3Tncj)
http://imagizer.imageshack.us/v2/150x100q90/913/1FkYbV.jpg (http://imageshack.com/f/pd1FkYbVj)
http://imagizer.imageshack.us/v2/150x100q90/910/teLtyg.jpg (http://imageshack.com/f/pateLtygj)
Well not what I'd like to be showing but this weekend I was cut off. I did manage to save the body/bumper from any damage yet the tire kissed the curb :mad:

Bastards! Glad you were able to save it though the cars looking good

2ndTimeHondaOwner
06-10-2015, 02:58 PM
Bastards! Glad you were able to save it though the cars looking good
Thanks, but I think something missing... Oh yah, blue brake lines like yours :D