pcv valve .

[Neuspeed87lx]

where does it go ? i cant find it

[Neuspeed87lx]

o there we go i found it in the faq section

[Neuspeed87lx]

damnit i found it but how the hell do you get it out ??

[Neuspeed87lx]

lol nevermind again i got it.... you just pull it out

[Mike's89AccordLX]

Hey Neuspeed87lx maybe you can help me then. I was going to buy a PCV valve yesterday and the guy gave me this little thing. I thought the pcv valve was that little tube that connects onto the inake manifold. The guy gave me the pcv valve and I said I don't think this is what I'm looking for. Do you have to take the tube off and take out the little valve? Thanks a lot dude.

[Neuspeed87lx]

yea you need to take the black u shaped tube off to get to the pcv valve its on the left side ... the pcv valve is this little metal thing ...its about an inch and a half long ... it was kinda tough to get out but i just pulled on it straight up and it came out ..then i just put the other one in and put the black tube back on it ..let me know if you need more help

[Y3G]

i have no clue where it is on mine i let the mechanic do that when it comes to doing the tune up stuff i'm stumped

[ACCORD EX]

on the intake maifold check the faqs !

MIKE

[88 Accord DX]

my PCV valve wont stay in the hole. i push it in and it just pops right back out.

[Mike's89AccordLX]

Well I guess I have to go back to the store and pick it up and install it. 88 Acccord DX, what I would probably do is warm up the rubber hose and then try to put the pcv valve in. It should expand the hose a little bit. And it's really easy to find if you know where the intake manifold is. :)

[Neuspeed87lx]

you dont put the pcv valve into the hose ...its goes into the intake manifold then the hose just slips over it

[Mike's89AccordLX]

Oh my bad. I was mis reading my pic from the haynes manual.