Camber adj.

[Metro]

I have lowered my car and I was wounring if its possible td adjust the camber afterwords.

The camber is now 3 degrees and should be 0

The book says its not possible, but I ask you guys anyway...

:wtf:

[maka_RTH]

get some prelude upper control arms, they have adjustable camber. or get the ingalls camber kit. i'm sure this is in the faq somewhere...

[maka_RTH]

ahh, here it is, i found it: http://www.3geez.com/showthread.php?s=&threadid=89

[doug]

you can install a 84-87 prelude upper control arm which has an adjustable ball joint, or you can buy this camber kit,
http://www.ingallseng.com/parts/3550.htm
or you could do both, which you may have to in order to get that much camber adjustment.

[DBMaster]

I would recommend the Ingall's kits. They are extremely easy to install and require no washers, ball joint separating, etc.

[anchovies]

Originally posted by DBMaster
I would recommend the Ingall's kits. They are extremely easy to install and require no washers, ball joint separating, etc.

Yeah, but you have to replace the whole arm if the ball joint fails. With the prelude, you just replace the ball joints (cheaper btw).

[DBMaster]

Have you seen many upper ball joints fail? The lowers are the ones that seem to go out. I already have over 200K miles on mine and they are still tight.

[anchovies]

Nope, but it hell feels safer with new ball joints when you lower the car and that joint is subjected to more stress. I don't want to end up crying in my bathtub cause I wrecked my car due to a $30 ball joint.

[Metro]

doug: that url don't work...

Where can I buy this kit?

I live in Norway in Europe...

[doug]

this is from the website

To locate a distributor
contact Cindy at 800-641-9795
or via e-mail
[email protected]
tell her you want to buy Part #
35500

Description
Honda Front Camber Adjusting Kit

Vehicle Applications
1986-89 Honda Accord
Adjustment Range
+1-1/2° to +3/4°

Installation Time
.8 hours per side

Quantity Required
1 kit per wheel

M.S.R.P.
$122.38