Signal Side View Mirrors

[JaVaSa84]

Is it possible to get turn signal side view mirrors for the 3G???
Holla bacc doggie!

[socal3rdgen]

i heard older celicas used to have them. try that.

[safeel]

There are loads on the neti u look arround, universal ones.
They look like the BMW M3 (E36) mirrrors with a small side repeater built in the front, they look cool, ma m8 had em on his Vectra and he shaved the stock side ones. Looks mint!!

[Jims 86LXI HB]

I think their might be a aftermarket company that makes a kit to adapt them to all kinds of cars. Don't remember where I saw it.

[3G Jester]

i just realized i have an old side miror assembly from a SAAB!!!! they simular in design.....i can just practice it there and figure it out.......before i hack up the 3g

[Chrome_thangs]

I was planning on making mine custom out of the stock 3g mirror. Just drill a hole in the case, attach a side marker, run the wires w/ the power mirror wires and you got your self some custom turn signal mirrors!

[88 Accord DX]

i was gonna do something kinda like Chrome_thangs except cut out a square (2 in. x 2 in.) out of the back of the mirrors then just put a light and a piece of amber in place then wire them to my blinkers. ive got a DX so there is no motor to the mirrors which might give me more room to work with.

[safeel]

sum good ideas there, i think it will work.

88 Accord DX>> use clear plexi glass instead of amber then use an orange bulb, will look much better!

But its gotta be sealed real good, or when u go through the car wash u will find out!!!

[dXsquared]

http://www.jcwhitney.com/images/imagecache/I23303.gif

WHO WANTS EM? 20 bucks pair

Travis

[87accordlx]

what about something like on the new ford windstar minivans, where there are led's beind the mirror? and they blink like an arrow?

[dXsquared]

i just posted that! damn!

Travis

[JaVaSa84]

the one with the arrows SUCC!!!!!
I need that shit that be on benzes and shit like that.

[wckdonex]

i was messing around in the junkyard and a side mirror from the 4g and our 3g side mirrors were close. i noticed the screw hols for the 4g to fit would have to be drilled, but plenty of rom for a strong hold. the main big hole for the passing of motor wires lines up also. i plan on using a 4g me like side mirror and drilling new holes for mounting. check it out next time youre at the junkyard.

[Neuspeed007]

Originally posted by Jims 86LXI HB
I think their might be a aftermarket company that makes a kit to adapt them to all kinds of cars. Don't remember where I saw it.

i know for a fact that there is companies, and u can get them for any car, u just need to put them on.. dont know where to look though............hmm maybe try hondatuner mag

[Neuspeed007]

Originally posted by DXHATCHBACK
i just posted that! damn!

Travis

ur dumb
he means on the exterior of the mirror, on the molding, u know!!!!! like most new cars!

[92accordination]

anything can be altered i think the 90-93 accord m-3's will fit with slight modifications. but in the original post you said signal mirrors like the brand Signal. i know www.importfan.com has the carbon fiber small wire mirrors that look really j-spec and has been seen on many skylines. but if you are just looking for m3 i advise ebay .. i bought mine for my 92 accord for like 60.00 and they were power w/ the l.e.d. light

daniel darezzo

[Nospeed]

Originally posted by JaVaSa84
the one with the arrows SUCC!!!!!
I need that shit that be on benzes and shit like that.

dude...anything can be done with a dremel! :D see if you can snag some of those mirrors from ebay, or even a j/y somewhere. cut you a spot in the mirror... then wire the blinkers like you would the sidemarkers (http://www.3geez.com/showthread.php?threadid=113) . just wire them for the blinkers, and not actually the steady lights (but that would be cool!). hope that helps.

[3G Jester]

no speed....those were my exact plans :D

[Swan]

HA! I found some!! they are at autozone....well, I work there, and I found a set in the box..... we haven't put them out on the floor yet... anyway, they are stick-on LED's and you run the wires between the mirrors (glass part) and the mirror housing... and they form to any shape because behind the glue pad is aluminum that easily bends.... I'm gonna get a pair.....anyway, just thought I would let everyone know about them...