Wiring new headlights

[c20v6turbo3rdgen]

How do I wire new headlights if I get the zenon type bulbs that fit into the headlamp it self. I am talking about the stock wire bracket that goes into the OEM light blub. How do I get that to plug into the new headlamps that have the snap in blubs in the back of the headlamp that go into it?

[A20A1]

If you have the flip up lights then the bulbs use the same 3 prong plug that the stock lights use... just pull it off the back of the old light and stick it into the new one.

[Mike's89AccordLX]

yeah it's not hard at all.

[c20v6turbo3rdgen]

no, I am saying i want to get the headlights like in the 02 accord that you just plug right in the the wires. I don't want the three prongs, I want the bulb to slide in and out when i want it to, I don't want it permentaly in the houseing.

[A20A1]

hmm... well the bulbs do slide in and out if you get the h4 conversion...

I don't use the sealed beam, but I still use the 3 prong plug.

[maka_RTH]

yah, get yourself an H4 conversion, it's the same hookup as the stock lights