PDA

View Full Version : Interior Work



sanjay
01-21-2003, 04:31 AM
Which of you 3G fanatics have redone your whole interior?
Pearldrop has done a sweet interior, but the problem is the price he paid for it.

Should I respray my interior in white paint?
Does that make the appearance heaps betteR?

See my sig for pics of my interior.
My interior is the nice dark blue. so should I ruin the good stock trim by painting it? Or should i just leave it alone?

sanjay
01-21-2003, 04:31 AM
How do I go about redoing my interior in imitation white? - is it very harD? - some comments would be greatly appreciated!
thanks sanjay

RobT5580
01-21-2003, 11:35 AM
I have done the back panels on my coupe and they were very easy. I have also done about 70% of the interior parts black and the door panels have a white insert. The front doors are gonna be the problem because of the angles. The back panel only had one bad angle when doing the material and took a bit of time to get it smooth. Basically you will need interior plastic paint, material you want, padding, 3M spray glue, hot glue gun, and a iron and damp cloth to smooth out material. I never finished it because thats my spare/winter car but i will be doing it again on my nice car when the body is painted.

sanjay
01-21-2003, 03:42 PM
pics? - thanks rob

RobT5580
01-21-2003, 04:57 PM
Send me a PM with your email. The picture is not that great but shows the panel ok. Its not real detailed cause the panel is black. I will email them to you.

sanjay
01-22-2003, 05:09 PM
[email protected]

Y3G
01-22-2003, 07:26 PM
i did my interior and a few of my friends cars as well
you should do the trim parts white(vents,clock,steering console,gauge pod)and leave the rest the nice blue and mabey in the door take out the fabric insert and put in some white vinyl. Then hit a store and pick up a white shift boot,blue shift knob,blue petals and bright blue floormats.if you want to go with a new stering wheel go momo apache or trec

Micah 89LXi
01-24-2003, 01:29 AM
Sanjay man..what u got on ur car 5% tint..damn dood...man u gotta put some kind of links or somethin on ur site..56k tryed to load all pics at once..ur killing me..nice car tho..am i the only one who took the cloth off teh speaker grilles?..they are black..they look sweet...looking for pic...hmm..kay dont have one..bleh ill get one later...i like ur rims...u should paint ur calipers white and ur back wheel hubs black....its not even that hard to do..with some sanding we did my friends in 2 hours

sanjay
01-24-2003, 04:12 AM
thanks micah, really appreciate it - and no, ur not the only one with no speaker grille cloth

hondaaccord_86
01-24-2003, 10:06 AM
like that?

hondaaccord_86
01-24-2003, 10:09 AM
i am workin on the door panels as of right now. ill take pics this weekend

bobafett
01-24-2003, 10:29 AM
that looks really good! amber wants to do her interior just like that!

sanjay
01-29-2003, 10:57 PM
hey, is that spray painted. Or the real upholstered thing?

hondaaccord_86
02-03-2003, 02:26 PM
its painted on. i dont know how the dash could be upholstery

heres a pic of my door...

hondaaccord_86
02-03-2003, 02:29 PM
btw, i only had time to do one door.

nvrenf
02-03-2003, 04:13 PM
painted interior parts is easy but if your goning to do it remove the dash its easier and be sure to clean it real good i like to use red scocht bright pad and wax&grease
remover or rubbing alchohal and then spray t with high build urathane primer and block sand it smooth then spray it with base coat clear it works really well and on all rigided plastics too.

89AccordLvr
03-10-2003, 05:24 PM
hey to remove the dash do you have to take out the steering wheel and what bout the seats also?

dXsquared
03-10-2003, 05:47 PM
i can recover the dash with fabric..... well i dont know if I could.. but it can be done... i am thinkin of geting some bright blue tweed for my dash, door pannels and rear seats.. and get some race seats for the front... here i go again.... wanting to spend cash on the 3g... I WANT A CRX!!!!!!

Travis

89AccordLvr
03-10-2003, 05:55 PM
i got a question should i use primer or sand the dash or do i use primer and sand on the vents and hard plastics

dXsquared
03-10-2003, 05:57 PM
sand the dash then prime it.. then sand it then prime it then paint it... and jus cleen the hard stuff REAL GOOD and prime it.. then paint


Travis

89AccordLvr
03-10-2003, 06:11 PM
k thanx

89AccordLvr
03-10-2003, 06:13 PM
oh yea i went to discount auto parts couple days ago and i was looking at the spray paint there and they have spray paint for vinyl. is that good enough for my dash board or should i buy the special ones on magazines .

Y3G
03-10-2003, 06:19 PM
if you need help just pm me i've done so many dashes i know all the tricks

buzzbomber88lx
03-10-2003, 06:39 PM
damn hondaaccord_86 that interior is bad! I am gonna start doing that to my bonneville(lol) because I am parting out the 88lx. I just like talking and helping you guys out so much I can't leave this site. thats cool interior man!
-Phat Padge