PDA

View Full Version : Clean87sedan's High compression B18c1 build & swap thread!



clean87sedan
04-25-2016, 03:24 AM
Well.... As most of you may or may not know, I chose to go a different route with my car. The A20 is a champ and ran strong & hard since day 1, but with having one more quarter of auto mechanics in school Ive decided to do something BIG. Something I never planned to do with this thing cause I never thought Id be able to. Anyways back to the matter at hand..

I picked up a 95 spec b18c1 motor that came with the following in it. I just decided to tear it down and see if everything is good to go because bought off CL..
Im working on the transmission & some other stuff currently and the loaded engine block & head is the only thing I purchased on CL.
Specs UPDATED as of November 16, 2017

Prior to current engine rebuild;
Dyno tuned in 80 degree weather on v-power 92 pump gas;
206 whp @ 8600 Rpms
143 wtq @ 7000 Rpms
Limiter set @ 8600
Launch control @ 5000

Engine Block;
B18c1 GSR
block bore 81.5mm
Deck shaved .010"
Balanced & polished GSR crank
Acl race rod bearings
Acl race main bearings
Manley forged rods
ARP rod bolts
New OEM main bolts
JE forged pistons 11.5:1 Compression (EST. 12.5:1 final CR ratio)
OEM water pump, tensioner, oil pump, seals & gaskets & so on..
Gates blue racing timing belt
Golden Eagle oil squirter plugs

Cylinder Head;
95 B18c1 milled .018"
port and polished IN/EX ports w/ port matched intake manifold
Ferrea bronze valve guides
Ferrea exhaust/intake valves (dished / stock size)
Ferrea valve stem seals
Skunk2 Lma's
Ferrea valve keepers
ARP head studs
Supertech springs and retainers (85lb)
Brian Crower Stage 2 NA cams
Skunk2 Pro Series Adj. cam gears
98 SPEC B16b Type R valve cover
Edelbrock Victor X intake manifold
Skunk2 Thermal intake manifold/ throttle body gaskets
66mm Skunk2 Alpha throttle body

Transmission;
93 Integra YS1 case
99 Civic SI B16a2 4.4 FD w/ matching 1-4 gear set & cable LS 5th (slightly shorter than hydro LS 5th)
Mfactory B16 Helical LSD
Synchrotech Carbon Synchro kit & new bearings/ seals
Fidanza 8 lb aluminum flywheel
Competition Clutch stage 1.5 clutch kit
ARP flywheel bolts & Pressure plate bolts
Factory magnetic drain plug (Trans & Motor)

Other misc;
Innovate 60A conversion mounts
TODA rep 1320 header
RC 310cc Injectors
Professional Products harmonic single drive crank pulley
so on and so on...

Ryon Toth
04-25-2016, 04:05 AM
Sounds like a great start, cant wait to see pics, as i think im gonna start saving for a swap myself!

Fixedit
04-25-2016, 05:53 AM
Gonna be a sweet set up man. Fast, cool looking and awesome sounding

Hash_man_Se_i
04-25-2016, 05:03 PM
Brodie, that is a really nice sounding motor build. Im officially jealous! Can't wait to see it go in, should be fun!

clean87sedan
05-03-2016, 11:43 PM
Here's the motor! Sorry for the wait super busy working on it. This is day 1 and 2 of getting the motor. Tore it apart to make sure everything was there for the most part before I decided to tear it down. More pics to come

http://uploads.tapatalk-cdn.com/20160504/32b69ed68c6ec70248fd472dec6b1019.jpg
http://uploads.tapatalk-cdn.com/20160504/ddbe5c6d2bfdf3dfcdd1cc1b72a361aa.jpg
http://uploads.tapatalk-cdn.com/20160504/301be0860b63649743f9f9bb7b711b4c.jpg
http://uploads.tapatalk-cdn.com/20160504/08961cca595a4e9a7c2d22c8cf8dbb16.jpg
http://uploads.tapatalk-cdn.com/20160504/03a8a59e19dd2b0113c7223b530f7c1d.jpg
http://uploads.tapatalk-cdn.com/20160504/83063dc3852ce315d249681541eff73d.jpg
http://uploads.tapatalk-cdn.com/20160504/ec6ca1b5fc9da86830b14be43ac24d99.jpg
http://uploads.tapatalk-cdn.com/20160504/0ec4b67465ee15ad1d9c74d3a5e4fe26.jpg

Everything I got with purchase of the engine

http://uploads.tapatalk-cdn.com/20160504/12f494c6a803718fd1c51cedde5f7b1c.jpg


Sent from my iPhone using Tapatalk

Tdurr
05-04-2016, 10:21 PM
As much as i hate you for giving in i do like it! Keep the quality there man! A+ stuff.

clean87sedan
05-05-2016, 11:58 PM
As much as i hate you for giving in i do like it! Keep the quality there man! A+ stuff.

Yeah I know lol I love my a20 and I put some serious work into it but stuff keeps breaking that I repair over and over and over because parts suck to find or even get. And I figure i was gonna do this to an a20 (high compression and all that) but the gains wouldn't be as nice for the price as it would be with this engine so changing it up and b series stuff is a lot easier and cheaper and they're stronger motor & trans wise

clean87sedan
05-06-2016, 12:03 AM
Got the innovate conversion mounts. 60a
http://uploads.tapatalk-cdn.com/20160504/7d267efdf8407ba770ccf6637780ca6a.jpg

The block didn't have oil squirters in it because of the forged Pistons they hit the bottoms of the piston, so I got GE oil squirter plugs which fit great and will raise oil pressure too
http://uploads.tapatalk-cdn.com/20160504/66a5c76bb2c25f64d50f6ee46e8012f1.jpg
http://uploads.tapatalk-cdn.com/20160504/6018d0a67bf9ba34d5a3a605038de3fb.jpg

The head was ported & polished on both intake & exhaust and the intake manifold was port matched and smoothed out. So I didn't want the runners to be all cast rough so I sanded the runners smooth
http://uploads.tapatalk-cdn.com/20160504/b92e265dded58feef483b7db1d662184.jpg

Guy gave me a stage 1.5 competition clutch with motor but I needed a flywheel. Did some hunting and I loved my 8lb one on the a20 so found a fidanza 8lb flywheel to match
http://uploads.tapatalk-cdn.com/20160506/6769482637508943aa739798c50cf2e6.jpg

Also needed a header. Wanted something that wasn't cheaply made and nothing that had huge runners hanging low so found this 1320 performance toda style rep header. Big tube with a 2.5" collector
http://uploads.tapatalk-cdn.com/20160506/9c4b81ca306afdfdb8239a38e80118f1.jpg




Sent from my iPhone using Tapatalk

clean87sedan
05-06-2016, 12:18 AM
Now onto the transmission!

I am using a 92-93 integra YS1 cable transmission casing with 99 civic si B16a gears, main & countershafts and 4.4 final drive. I also put the LS 5th in to help freeway driving.

The transmission was from a buddy of mine who blew the diff and pieces of it out the rear of the case and he said it was toast most likely but he didn't open it up. I opened it and cleaned out the debris and luckily somehow all the gears and internals were Good! Well besides he diff... Anyways. Here's pics of the damage done

http://uploads.tapatalk-cdn.com/20160506/41bedca106a3449176bf2f74c55d76b2.jpg
http://uploads.tapatalk-cdn.com/20160506/38b1a55403a970316189196a7b8ff0c0.jpg
http://uploads.tapatalk-cdn.com/20160506/0cce14b719e9cc366795050517de4233.jpg
http://uploads.tapatalk-cdn.com/20160506/3f3f9c005c78715170a486d2eeba84b7.jpg
http://uploads.tapatalk-cdn.com/20160506/638295c9598b682bb621ed1bb1b43631.jpg
http://uploads.tapatalk-cdn.com/20160506/9b56a0329dacd9953db3f6659a4673a1.jpg

I took all the internals, cleaned them up, got a rebuild kit from synchrotech with the carbon pro series synchros and all new bearings & seals. Also figured at this time and knew I didn't want this to happen again, I got a Mfactory helical LSD for the trans as well. This setup all together is a ys1 case, b16a2 1-4th, main & cohntershaft, 4.4 final drive, LS 5th and Mfactory LSD

http://uploads.tapatalk-cdn.com/20160506/c8aff8f79cb7c8687fa10e199b9a04cd.jpg
http://uploads.tapatalk-cdn.com/20160506/b96a1ee4c3bbe4c1c15b59143ff37f1d.jpg

Painted the case

http://uploads.tapatalk-cdn.com/20160506/1ae8eb34d1f8d188eef09058cf6ad852.jpg
http://uploads.tapatalk-cdn.com/20160506/c29b85cfb3f033a6754f62bd31ebb88a.jpg


Sent from my iPhone using Tapatalk

clean87sedan
05-06-2016, 12:45 AM
I went ahead and decided to rip the head off to see the guts of this thing and wanted to make sure everything is done right and ready to go since I bought it second hand. Man.. These pistons are mad dome!

http://uploads.tapatalk-cdn.com/20160506/88837d9a17dee8f60dd90ef7f1d0e79c.jpg
http://uploads.tapatalk-cdn.com/20160506/110bcba90a4ad523afcd060b1690822a.jpg
http://uploads.tapatalk-cdn.com/20160506/d56f3229c6cf9679e2b39c61b7b53bc0.jpg
http://uploads.tapatalk-cdn.com/20160506/aaf382b8d39298b5dab095a03585f46b.jpg
http://uploads.tapatalk-cdn.com/20160506/7d86162e197c161faea33c31b0dbed3e.jpg
http://uploads.tapatalk-cdn.com/20160506/027e5b4679519a6041610e1d5926de81.jpg

The head had some good scratches on the surface from the guy putting it on I'm guessing so I took it to a shop to get resurfaced. Come to find out the surface was warped a little, the head failed a vacuum test and came to find out the valves weren't installed right by previous guy. All good now though and holds vacuum!

Before
http://uploads.tapatalk-cdn.com/20160506/5b2c0aec4f5afd56679ba99dcaad534a.jpg

After. Don't mind the oil on the surface. http://uploads.tapatalk-cdn.com/20160506/11df0f429758e0aedd1ac156d5af9cd6.jpg



Sent from my iPhone using Tapatalk

Hauntd ca3
05-06-2016, 11:42 AM
I'd be wanting to manually measure the CR just to be safe .
When i had my B20a rebuilt the measured CR end ended up at nearly 13:1 even though the pistons are 10.5:1 wisecos.
Slight difference in rod length , head and block skimmed just enough to make them flat gave a big jump .
Made it to high for the pump gas available to me .
Ended up having to take material off the tops of the pistons to get down to 10.8:1
Will be interesting to compare numbers when they are both running and tuned .
Fully tweaked b18C v fully tweaked B20a

clean87sedan
05-06-2016, 10:01 PM
I'd be wanting to manually measure the CR just to be safe .
When i had my B20a rebuilt the measured CR end ended up at nearly 13:1 even though the pistons are 10.5:1 wisecos.
Slight difference in rod length , head and block skimmed just enough to make them flat gave a big jump .
Made it to high for the pump gas available to me .
Ended up having to take material off the tops of the pistons to get down to 10.8:1
Will be interesting to compare numbers when they are both running and tuned .
Fully tweaked b18C v fully tweaked B20a

Yeah im looking at these saying "these are only 11.5:1????" Lol and my cylinder head is milled enough to bump the cr up another like .5 to that so.. Yeah I'm gonna have to clay the engine for clearance and see what I get

Hauntd ca3
05-07-2016, 12:07 PM
what sort of gas do you have available ?
If i had 98 available i probably wouldnt have worried about dropping to 10.8:1
Probably 11.5 - 12 :1 , but since 95 is the best i can get in town at the moment and is available pretty much anywhere i go , i went a bit lower .
And gas quality varies quite a bit down this end of the world so erred on the side of safety , i cant afford 10k to rebuild from scratch if the engine gets damaged from detonation .

clean87sedan
05-07-2016, 01:17 PM
what sort of gas do you have available ?
If i had 98 available i probably wouldnt have worried about dropping to 10.8:1
Probably 11.5 - 12 :1 , but since 95 is the best i can get in town at the moment and is available pretty much anywhere i go , i went a bit lower .
And gas quality varies quite a bit down this end of the world so erred on the side of safety , i cant afford 10k to rebuild from scratch if the engine gets damaged from detonation .

I run shell V power 92. There's a trick fuel station out here too that I can get gas from if I plan on beating it up at the track or something. Wouldn't hurt. My friend has a 12.7:1 d16 and he runs shell premium with no issues. I think 11.5 is the highest I would go on anything cause any higher 92 won't cut it

clean87sedan
05-10-2016, 12:55 AM
Update.. Well kinda..
Tore the block down to nothing to check everything since I bought it all together. Glad I did.. Second ring on cylinder 1 was chipped. Nothin major I'm guessing the ring expander tool chipped it cause that's what it looked like and I almost did the same thing lol. Anyways, tore it apart, cleaned and inspected everything and reinstalled all ready for the head to go on after more measurements and checking piston to valve clearance.

http://uploads.tapatalk-cdn.com/20160510/1d53554d94b6adaa8a85f924becd1431.jpg
http://uploads.tapatalk-cdn.com/20160510/ecfec2ee92b2a429037d1cc0af3839ff.jpg
http://uploads.tapatalk-cdn.com/20160510/69b04a569e158a2457dbf3c522f00834.jpg
http://uploads.tapatalk-cdn.com/20160510/cd8489392bcea786905d9f3c826cbbc8.jpg
http://uploads.tapatalk-cdn.com/20160510/a1803f85096b8ded6bba94974c65bc18.jpg
http://uploads.tapatalk-cdn.com/20160510/171ebf6eae40e04d2e9ec6d2d712c1f7.jpg

Chasing the threads for precise torque

http://uploads.tapatalk-cdn.com/20160510/06dfafea4d49ec9c0039cafe08979730.jpg
http://uploads.tapatalk-cdn.com/20160510/14e186891f9e6ba5e0a1176a314573fc.jpg
http://uploads.tapatalk-cdn.com/20160510/cf77f09a966ac42376b230808af3508e.jpg
http://uploads.tapatalk-cdn.com/20160510/afdc7d553e658b87c4eefe759a152386.jpg


Sent from my iPhone using Tapatalk

clean87sedan
05-10-2016, 12:58 AM
Rotating assembly is done!

http://uploads.tapatalk-cdn.com/20160510/c75fe97a3b7630af3f22e181ea6628ad.jpg
http://uploads.tapatalk-cdn.com/20160510/64499189166e0baf645a3261ade969a0.jpg
http://uploads.tapatalk-cdn.com/20160510/597d3e38c155df5ffa9a5db14e07741b.jpg
http://uploads.tapatalk-cdn.com/20160510/da1c5830ed010ceaf3fd478d36c2a0ee.jpg


Sent from my iPhone using Tapatalk

Tdurr
05-12-2016, 11:31 AM
swap this in the car already!

clean87sedan
05-12-2016, 10:19 PM
swap this in the car already!

Soon dawg. Soon

clean87sedan
05-12-2016, 10:21 PM
More progress.. It's sealed up which means major parts are done! Head is on just gotta finish buttoning up the cam caps and what not

http://uploads.tapatalk-cdn.com/20160513/5ea747df537f3dbedba9c06f422069bd.jpg
http://uploads.tapatalk-cdn.com/20160513/4d7fd7eff5210a5af61c1ac75ebb9d0b.jpg
http://uploads.tapatalk-cdn.com/20160513/c8c5abe64b219a2df93a5bbba1021498.jpg
http://uploads.tapatalk-cdn.com/20160513/8544e8412f09a2cc1b03530c0f1683aa.jpg



Sent from my iPhone using Tapatalk

Hash_man_Se_i
05-13-2016, 05:01 AM
Looking good! Interesting to see some of the things you find when tearing down someone else's work.

I'm actually thinking of the same header myself too.

Hauntd ca3
05-13-2016, 11:48 AM
I'm surprised that it has such a small crank girdle , even the b20a has a full length one.
Are the crank oil feeds in the block of the later b series ? Just wondering since the b20a has them in the girdle.

Tdurr
05-13-2016, 12:29 PM
hey if you didnt put sealant(like rtv or anything) you should pull ur oil pan and:
a. paint it with a fresh coat of black(because we all like pretty thing)
b.paint a white line around the top of it so if you develop any leaks you can pinpoint them right away.

just food for thought. build looks great tho!

clean87sedan
05-13-2016, 04:58 PM
hey if you didnt put sealant(like rtv or anything) you should pull ur oil pan and:
a. paint it with a fresh coat of black(because we all like pretty thing)
b.paint a white line around the top of it so if you develop any leaks you can pinpoint them right away.

just food for thought. build looks great tho!

I put Honda bond RTV on the pan and multiple other gaskets

clean87sedan
05-13-2016, 04:59 PM
I'm surprised that it has such a small crank girdle , even the b20a has a full length one.
Are the crank oil feeds in the block of the later b series ? Just wondering since the b20a has them in the girdle.

They're under the main bearings in the block yes

clean87sedan
05-13-2016, 05:04 PM
Engine is together! Just bolting on like dizzy and other stuff :) everything internal is done. Timing is set, Valve lash is set, it's getting close to bolting the trans up to it

http://uploads.tapatalk-cdn.com/20160514/61d4530073b8710fa27c1b7d136b4503.jpg


Sent from my iPhone using Tapatalk

clean87sedan
05-16-2016, 09:26 PM
So this happened today... My god it is so close to going in

http://uploads.tapatalk-cdn.com/20160517/cbc58a04e3fe6489a14c0a4bf720bd29.jpg
http://uploads.tapatalk-cdn.com/20160517/593cfb4bd8354fd571262fb394c01d10.jpg
http://uploads.tapatalk-cdn.com/20160517/ad299e1236d1eed0c873f8af847f85e7.jpg
http://uploads.tapatalk-cdn.com/20160517/b5d8097f5982e71fb25a82e482301df9.jpg
http://uploads.tapatalk-cdn.com/20160517/d640738f46a6ab8f83f21241e07b1048.jpg


Sent from my iPhone using Tapatalk

Tdurr
05-17-2016, 07:32 PM
So this happened today... My god it is so close to going in

Thats what she said

clean87sedan
05-17-2016, 09:20 PM
Thats what she said

Oh geez lol

clean87sedan
05-17-2016, 09:21 PM
At this moment, it could be all or nothing... Definitely glad the motor didn't chose to go down the nothing road lol. So excited now more than I already was :)

https://vimeo.com/167070812


Sent from my iPhone using Tapatalk

clean87sedan
05-17-2016, 09:24 PM
The a20 is out! In record time. Only a little under 90 minutes. Man I'm gonna miss this thing

http://uploads.tapatalk-cdn.com/20160518/e8f5cd636d3da67ded4fb0221d71df0e.jpg
http://uploads.tapatalk-cdn.com/20160518/0b3ceef334b4c2ef931b62cd785f71aa.jpg
http://uploads.tapatalk-cdn.com/20160518/0d43e892569ec5b1e62337dace39eedf.jpg
http://uploads.tapatalk-cdn.com/20160518/69a66f35a87ce12737ac535c5dc191b1.jpg
http://uploads.tapatalk-cdn.com/20160518/ed746bf6d2315212782b11dc9c5f3e6d.jpg


Sent from my iPhone using Tapatalk

Fixedit
05-18-2016, 11:40 AM
Memories!!

clean87sedan
05-19-2016, 01:34 AM
Getting so surreal... Test fitted the motor and got the mount welded in

http://uploads.tapatalk-cdn.com/20160519/2b453103a705c5493159c7101899cf6e.jpg
http://uploads.tapatalk-cdn.com/20160519/c327bba006f7aa38d6cd607ddd3d3c3e.jpg


Sent from my iPhone using Tapatalk

Fixedit
05-19-2016, 01:11 PM
Looks so cool sitting in there!!

clean87sedan
05-24-2016, 01:12 PM
Intake manifold is assembled
http://uploads.tapatalk-cdn.com/20160524/ef43a11326c8ca291ffad05cc38f7f74.jpg


Sent from my iPhone using Tapatalk

rushell
05-26-2016, 05:20 PM
do u still have the obd 1 stuff

nastytee
05-27-2016, 03:16 AM
I can't wait to see how everything turns out!

clean87sedan
05-28-2016, 07:02 PM
A little update over the last week..
Finished modding the harness and got the motor in for the final time and mounted. Getting all the bits & pieces put on and should be good in a few days :)

http://uploads.tapatalk-cdn.com/20160529/70c4d44a9339ed759f6358577c0ae3b6.jpg
http://uploads.tapatalk-cdn.com/20160529/238b8ef7de07388493283f30cbcfa515.jpg
http://uploads.tapatalk-cdn.com/20160529/b1da2803686a4f3f8e4e4d4f29dba0c3.jpg
http://uploads.tapatalk-cdn.com/20160529/f8a9177fa12a4f8c5df980688f364bd4.jpg
http://uploads.tapatalk-cdn.com/20160529/58acf8654b1bd955d2dd188ed566b107.jpg


Sent from my iPhone using Tapatalk

Hash_man_Se_i
05-29-2016, 10:01 AM
Looking good! So close!

Just out of curiosity though did the victor X come with the motor? From my understanding those are best performance wise on boosted applications.

clean87sedan
05-29-2016, 12:16 PM
Looking good! So close!

Just out of curiosity though did the victor X come with the motor? From my understanding those are best performance wise on boosted applications.

Yeah it came with it. Not a bad manifold but yeah it's great for boost


Sent from my iPhone using Tapatalk

clean87sedan
06-02-2016, 12:32 AM
Current stage lol no axles don't wanna split the bearings

http://uploads.tapatalk-cdn.com/20160602/05e9c14432db374d563fde1df6646bb5.jpg


Sent from my iPhone using Tapatalk

clean87sedan
06-02-2016, 12:35 AM
It runs! Short sneak peek clip but it runs! Runs and sounds strong too!

https://vimeo.com/169061838


Sent from my iPhone using Tapatalk

Tdurr
06-04-2016, 12:58 PM
needs more burnouts.

clean87sedan
06-05-2016, 08:07 PM
Cheddas auto shifter bushing kit. Got it to work with the B series shift linkage u joint and also used the accord shift linkage and adapted and cut it to the right length to work on the B series trans and A series shifter & linkage. I like having the ability to remove the linkage by the bolt rather than that stupid pin
http://uploads.tapatalk-cdn.com/20160606/3cbb6a9b6867c02230ddb4faf6f775e4.jpg
http://uploads.tapatalk-cdn.com/20160606/792f97556216b7dc55e20157a06a3ab2.jpg



Sent from my iPhone using Tapatalk

Tdurr
06-09-2016, 04:49 PM
fucking smart.

Fixedit
06-09-2016, 06:00 PM
Hell yeah dude nice work! That's the way to do it!

clean87sedan
06-12-2016, 12:42 AM
Sorry about not keeping you guys updated In a while. About to toss up a bunch of stuff


Sent from my iPhone using Tapatalk

clean87sedan
06-12-2016, 12:43 AM
Some fancy shots before she hit the road... Kinda hit the road I should say lol.

http://uploads.tapatalk-cdn.com/20160612/bb42f9c3f1f233c3b5c073f3e282935e.jpg
http://uploads.tapatalk-cdn.com/20160612/672ecc8be1cb9ba4713efe5789183b28.jpg
http://uploads.tapatalk-cdn.com/20160612/ff311aef1eb173c79f01618b5d9d596b.jpg


Sent from my iPhone using Tapatalk

clean87sedan
06-12-2016, 12:45 AM
After aligning the car, it definitely needs more low in the front.. Dang thought it wouldn't need it lol

http://uploads.tapatalk-cdn.com/20160612/ee3f42bce8fe6c4714511f961f424c7c.jpg
http://uploads.tapatalk-cdn.com/20160612/5602567c1adb5c6e610a0db2d1a55276.jpg


Sent from my iPhone using Tapatalk

clean87sedan
06-12-2016, 12:48 AM
Made this for Josh Rendon aka RendonLxi but here y'all go. Short walk around
https://vimeo.com/170347273


Sent from my iPhone using Tapatalk

Tdurr
06-15-2016, 10:47 AM
looks slow :P

clean87sedan
06-15-2016, 02:20 PM
looks slow :P

Cause it's not moving duh lol


Sent from my iPhone using Tapatalk

Tdurr
06-16-2016, 04:40 PM
touche!

clean87sedan
06-29-2016, 09:51 AM
Doing some little things before the tune today :)

http://uploads.tapatalk-cdn.com/20160629/9d5afda925b4697cf3c012428a18b811.jpg

clean87sedan
06-29-2016, 09:54 AM
Ballin on a budget.. Stupid fuel rail I had was garbage and wouldn't work so had to get this composite skunk2 rail. Sleek look makes it even better and now I have my aeromotive regulator hooked up but not shown

https://vimeo.com/172779671


Sent from my iPhone using Tapatalk

Tdurr
06-29-2016, 04:00 PM
lol @ yay.

Hash_man_Se_i
06-29-2016, 06:43 PM
Fancy!... Now, where's the dyno sheet?

clean87sedan
06-29-2016, 08:04 PM
There you go. The a20 is on there in the green as a comparison. Funny thing is look at the graphs and how they're the same but way different endings lol

http://uploads.tapatalk-cdn.com/20160630/8bad4d219de5f5e69165714b090d367e.jpg


Sent from my iPhone using Tapatalk

clean87sedan
07-02-2016, 04:25 PM
Finally got the bay detailed and looking great

http://uploads.tapatalk-cdn.com/20160703/d656248dc8a3f1c21d8508dfe5692346.jpg


Sent from my iPhone using Tapatalk

Tdurr
07-02-2016, 07:43 PM
cute.

soul_popper
07-04-2016, 11:15 AM
Very nice job . Everythings nice and clean. Hope my build comes out as clean . Nice numbers by the way.

Hash_man_Se_i
07-04-2016, 08:31 PM
There you go. The a20 is on there in the green as a comparison. Funny thing is look at the graphs and how they're the same but way different endings lol

http://uploads.tapatalk-cdn.com/20160630/8bad4d219de5f5e69165714b090d367e.jpg


Sent from my iPhone using Tapatalk

Awesome! What kind of dyno? Those are some reall nice numbers!

clean87sedan
08-21-2016, 07:49 PM
Haven't posted in a while! Nothing really new besides issues with the car but not related to engine swap. Just 30 year old parts lol

Only real new thing is I made a catch/ breather can setup for the high rpm blow by

http://uploads.tapatalk-cdn.com/20160822/e536335180a7d66b5bd5f764eacfd3eb.jpg

http://uploads.tapatalk-cdn.com/20160822/6ab2cccf7598d3451fec866d0af9d8c1.jpg

http://uploads.tapatalk-cdn.com/20160822/d78abd62ef20e0d3a9f00763850e054c.jpg



Sent from my iPhone using Tapatalk

Tdurr
08-21-2016, 08:54 PM
Cool beans. Got any kills yet?

clean87sedan
12-20-2016, 01:20 AM
Hello followers! Long time no post! Well here's a collage of some pics & videos of the build I just made

https://youtu.be/2LLGaji-9kk


Sent from my iPhone using Tapatalk

Tdurr
12-20-2016, 08:12 PM
i hope a built motor made more then a factory single cam :P

You gonna be doing a photoshoot with anyone anytime soon?

clean87sedan
06-07-2017, 11:57 PM
i hope a built motor made more then a factory single cam :P

You gonna be doing a photoshoot with anyone anytime soon?

Oh hey there buddy lol. Nah probably not Hahahaha


Sent from my iPhone using Tapatalk

clean87sedan
06-07-2017, 11:59 PM
Hope everyone's doing good haven't been logged in on here for months! Cars doing great I'll be posting updates over the next few days possibly when I have time

https://uploads.tapatalk-cdn.com/20170608/9078a184e579f66a650b4749e56e97eb.jpg


Sent from my iPhone using Tapatalk

Tizi808
03-23-2019, 07:55 AM
Hope everyone's doing good haven't been logged in on here for months! Cars doing great I'll be posting updates over the next few days possibly when I have time

https://uploads.tapatalk-cdn.com/20170608/9078a184e579f66a650b4749e56e97eb.jpg


Sent from my iPhone using Tapatalk

update?
:bowrofl: