View Full Version : heeeeeeeeeeeeeeeeeeeelp ! ( CV joints)
ACCORD EX
01-23-2003, 11:18 AM
:crying:
after the spindle nut , filling bolt , damper fork , spider clips , dynamic damper got all the shit out of me ! :( :crying:
now i can't put the clamps ( boot bands back on )
well i have different clamps types ( metak ) + 1 plastic type ( i think it's called zip tie !
my question is do i need to tighten the clamps real hard and if so how can i do that ( the clamp keeps on sliding if i pull it using pilars from one side !
here are the pics of the clamps !
http://members.fortunecity.com/accordex87/clamp1.jpg
http://members.fortunecity.com/accordex87/clamp2.jpg
http://members.fortunecity.com/accordex87/clamp3.jpg
http://members.fortunecity.com/accordex87/ziptie.jpg
pleeeeeeeeeeeeease help !
MIKE
anchovies
01-23-2003, 01:24 PM
Use the metal clamps instead of the zip ties (although those work also). Put the clamp on and tighten a little on the inner side of the boot then slide it towards the outer (where you want the clamp to be). Then just tighten a little bit more and lock it. Should be alright. Maybe other ppl have different methods.
ACCORD EX
01-23-2003, 01:38 PM
but how do you tighten a little ! ? just hold the clamp with your hane while pulling the other side ?? or using pilars and a screw driver !
please help every body !
MIKE
I used the aftermarket ring that require a screw to tighten and not the one that came with the boot. It will make work alot easier. Please get someone to help you pull the boot.
ACCORD EX
01-23-2003, 03:55 PM
well that a good idea ! but anyother ideas to use the current ones ! come on guys , i know someone did that before for sure !
MIKE
ACCORD EX
01-24-2003, 07:13 AM
i tried the hose clamps ( with screw ) but they are to wide to fit
do you guys have any idea how to put the clamp in PIC 2 on and tightening it ! i just hate sitting like this ! damn ! :crying:
MIKE
guaynabo89
01-24-2003, 07:32 AM
Originally posted by ACCORD EX
i tried the hose clamps ( with screw ) but they are to wide to fit
do you guys have any idea how to put the clamp in PIC 2 on and tightening it ! i just hate sitting like this ! damn ! :crying:
MIKE
You need a special tool to tighten that ring so you can bend it into place. I have one laying around. All it does is take the matal and spins it around a rod intil its tight enough and ben it into place.
Let me tell you even having the proper tool to tighten the clamp with its still a pain in the butt.
A zip tie will never hold. If you need it fixed in a pinch you can use a screw type hose clamp. It doesn't have to fit in the groove of the boot as long as its holing the boot past the lip on the axle itself.
ACCORD EX
01-24-2003, 12:18 PM
damn ! :(
anyother ideas ?
thanx a lot !
MIKE
ACCORD EX
01-28-2003, 03:23 PM
well finally after a lot of search i coud gind some new clamps and i put every thing back today ! wow it feels good ! :D
thankx for all the help guys !
MIKE
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.