PDA

View Full Version : Soul_Popper's 1989 Lxi project



soul_popper
07-01-2016, 09:21 PM
My First build thread and I wanted to start this a bit sooner but oh well, and I know I'm not the best writer so please bare with my guys...Post is a bit long sorry


History of car:
I recently got a 1989 Honda Accord lxi 5 spd for 475 Bucks. Which I think over payed for considering all the work it needs, year, and mileage (243k on body and motor) but I fell in love the body style so in the end I can't argue. The guy who I bought the car off of was nice enough to hold the car for me till I had the money and it was in very rough shape but some what very well maintained over the years (about a 4 inch stack of recipients & documentation of all the work and maintenance done to the car over there years) So with that being said the project begins .

The good: runs and drives, interiors decent and just about everything other then the ac works. Under the car isnt rusted to hell like most cars this age especially considering all the salt over the winters (im from connecticut)

The Bad: quater panel rust, needs fenders, driver side corner light, driver side taillight, Rocker panel rust, passenger mirror, and has a misfire & a oil leak believe its just from the valve cover but havent looked into it.

Its a big project and I'm on a budget but I wanna do things right the first time & i already feel invested and committed :)

My plans condensed : Bodywork - Suspension - swap - Paint

Goals - reliable as I plan on daily driving the car but im not driving it till I'm done with most to all the work. My hp goals are 350 - 400 whp

Ive been floating around piecing a bunch of the information i need as im new to accords but i need help and info on the swap , i searched but
havent found much specifics. I know i need the motor, tranny, ecu, wiring harness, axels, and shift linkage and custom mounts but I'm not sure what axels I need and about the wiring. I decided to go with a d16z6 with a d16y8 head with a ef si tranny but before u guys knock on me and give me a hard time I'm set on this motor swap. Since I'm getting it for cheap & The a20a3 currently in there is kinda strong with everything considered but there's no after market support and my goals are 400 whp . This is my biggest obstacle parts are extremely rare and I'd rather drop in a lower mileage motor that's cheap and easy to replace in worst case scenario , compared to custom parts most the a20s need . I'm getting the motor and tranny for about $200 with goodies plus some other parts I might buy from a friend. Downside is I'd have to wait till he comes back from basic training to get the parts. But till then I'll read up and work on the rest of the car.

So far I started prepping for the body work. I've sanded down the whole car already. I'm probably going to start doing the bondo tomorrow and work on the quarters and rockers on Monday.

It took me a whole week of searching but I finally found the parts I need , tried every place online that seemed trust worthy with no results and junkyards all over but I finally found all the parts I needed for the car in a junkyard in western up state NY a 5 hour drive from where I'm located. They would only ship it freight for 220$ just for shipping so I decided to just take the drive. So I'm going to go on Friday morning soonest day I'd be able to go and they were closed this weekend for the holiday.

I'll post pics in a bit and I'll keep you guys posted on any work I do on it even if no ones reads this.

Tdurr
07-02-2016, 10:36 AM
Im liking the sounds of this. Good deal man! Deff post any updates(and pics) you have as we loog a good restore/build!

soul_popper
07-04-2016, 10:45 AM
Update : Ended up having to hold off on doing the body work as I injured my leg the other day. I did get to doing a tiny bit but not much. I'm still trying to post pics but not sure how to post pics yet .

soul_popper
07-06-2016, 01:30 AM
Picked up the d16 cable tranny with shift linkage for 100 bucks the other night off a friend. I also seen a d17a1 motor on cl for cheap i might pick up friday as well if the guy still has it. If he does then im building the d16z6 block to a stroker. Using some of the d17 internals . Hope the guy still has it, ill let u guys know soon.

Tdurr
07-06-2016, 07:05 PM
have fun doing the D swap. lol

soul_popper
07-13-2016, 07:34 AM
Update: so I went to upstate ny and picked up the fenders corner lights and a new Hood latch and installed them the next day. I also ended up picking up that d17a1 block from that guy on cl looks in decent shape.

Sent from my SPH-L720 using Tapatalk

soul_popper
07-13-2016, 07:36 AM
http://uploads.tapatalk-cdn.com/20160713/f268e8d0b55bc8fd0d9e5119b0fac14a.jpghttp://uploads.tapatalk-cdn.com/20160713/31147b955c00ce7731c355f4f6fc55c6.jpghttp://uploads.tapatalk-cdn.com/20160713/99f3dc2c45ef4725413cb50579c99e43.jpg

http://uploads.tapatalk-cdn.com/20160713/b8ff3e6b26f2d6b1380b219d30d31f47.jpghttp://uploads.tapatalk-cdn.com/20160713/ae6e762c84ee29e5cd721c64122b7d5e.jpg

Sent from my SPH-L720 using Tapatalk

soul_popper
07-13-2016, 07:38 AM
http://uploads.tapatalk-cdn.com/20160713/a200981af315394e11dee6cc58c4ebcd.jpghttp://uploads.tapatalk-cdn.com/20160713/7750c98eb9a77407bcf5f8452264b3da.jpghttp://uploads.tapatalk-cdn.com/20160713/6796a83c34dbfaabfaf26b2294afc599.jpghttp://uploads.tapatalk-cdn.com/20160713/5b89eaf325166efd6356272a1fa7b298.jpghttp://uploads.tapatalk-cdn.com/20160713/b6cfbd5facfab116b2f74665feda91e8.jpghttp://uploads.tapatalk-cdn.com/20160713/e73576ccabd880c565ec5db466360079.jpghttp://uploads.tapatalk-cdn.com/20160713/4f5f4f95a625988654f60579ff990b70.jpg

Sent from my SPH-L720 using Tapatalk

soul_popper
07-13-2016, 07:44 AM
I was going to just try and cut and patch sheets of metal in the quarters but I ended up deciding on just buying replacements. So waiting for the quaterpanel replacements to get here, it will save me so much time and headaches from the rust and crap bondo job previous owner did on quarter panels.

Sent from my SPH-L720 using Tapatalk

nastytee
07-19-2016, 03:11 PM
It looks promising! Looks like a nice score since it still runs.

soul_popper
07-24-2016, 09:36 AM
Thanks for the encouragement, Its been a while since i updated but i got the quater panel replacements a few days ago. I haven't got around to doing them yet ima have a buddy help me with it soon . I also got a pair of rims for a decent price. decided to drive the car for the time being till the swap gets done cause of school and work reasons.

Also coming in the mail, new valve cover gasket, o ring to fix oil leak, gallon of primer + activator, new steering wheel, shifter and boot , pedal covers .


I preferred to keep them silver but decided to paint them black since the plastic film on them was crap.

http://uploads.tapatalk-cdn.com/20160724/c009f145d4986b4b792c9c980ac72b5d.jpg

http://uploads.tapatalk-cdn.com/20160724/2b06c26c0c9b28be8ac5d06c8fa2cfbe.jpg



Sent from my SPH-L720 using Tapatalk

MessyHonda
07-24-2016, 09:13 PM
cool build thread. i was wondering if the b swap mounts could help you swap in a D.

soul_popper
07-25-2016, 03:23 AM
Thanks and yea from the research I did the driver side and top tranny mount are the same just the passenger and tranny bracket mounts differ from the b and d . Wasn't sure if I should just buy the b series Innovative mounts and adjust them to work or just buy some d series mounts and customize those to suit my needs . Does any one happen to know why u guys swap axels and mix and match intermidate shafts ? Is it due to the length? Or spline count? Kinda of a noob question but any help would be greatly appreciated .

Sent from my SPH-L720 using Tapatalk

soul_popper
08-08-2016, 03:50 PM
Update got the quater replacements in im no professional but it came out all right my friend helped me with a bit of the body work still got alot to go

We figerglassed the gaps in the crappy job i did and i just got to do the rest of the bondo once everything sanded down, which ill do throught out the week hopefully.

http://uploads.tapatalk-cdn.com/20160808/32c9ad5ceb562664f2590381e6b80cb1.jpg

http://uploads.tapatalk-cdn.com/20160808/c17da65528c86d96fe8047cdeddd5ae3.jpg

http://uploads.tapatalk-cdn.com/20160808/9ec2da0680f5310656520ae1fd91d641.jpg

http://uploads.tapatalk-cdn.com/20160808/cfb2d79e57441dc476d1b41deeca7532.jpg

http://uploads.tapatalk-cdn.com/20160808/f74bd5ca94305a3eb07a7e5edeedfe3a.jpg

http://uploads.tapatalk-cdn.com/20160808/b9bd8ff5f6c0c1219245cb78cb486ed5.jpg

http://uploads.tapatalk-cdn.com/20160808/ba8d70c134542faa8599ac1e11fcbd0e.jpg

http://uploads.tapatalk-cdn.com/20160808/ee934b447af8c43042f4ddbb66cf0f3c.jpg

More to come soon.

Sent from my SPH-L720 using Tapatalk

soul_popper
08-08-2016, 03:55 PM
Also did wires, cap, rotor, valve cover gasket new pcv vavle and degreased the motor from the oil build up from the valve cover leak .

Sent from my SPH-L720 using Tapatalk

Tdurr
08-10-2016, 08:56 AM
Respect. That's some dedication there!

soul_popper
08-16-2016, 08:23 PM
Respect. That's some dedication there!
Thanks man i try lol


Sent from my SPH-L720 using Tapatalk

soul_popper
08-16-2016, 08:40 PM
Update : So my steering wheel hub didn't fit it was slightly to big so im waiting for the new one to come .

Decided to boost the a20a3 soon. When i eventually use it as my daily. Got a couple turbo things laying around so it shouldn't be to much to boost the a20.

Sanded down the center caps for the rims and have the horn center out. They are sanded down and prepped for printing .

http://uploads.tapatalk-cdn.com/20160817/638df004bac134015b1f97abf27e07e9.jpg

My pops works at a printing company so ima have him print some thing on them. Now the question is what should i have him do??? Here are some options, any ideas would be great . It could be anything.

http://uploads.tapatalk-cdn.com/20160817/b81296a6f3d19dd31a18523f738bfe09.jpg

I plan to epoxy them after aswell so it would have a nice rounded glassy finish

Sent from my SPH-L720 using Tapatalk

Shane86
08-17-2016, 04:46 PM
Nice body work how long did that take

soul_popper
08-17-2016, 06:22 PM
Took me a most of a saturday just stripping the interior and getting the moldings off and a just few hours to weld & cut the quater replacements . Then a few more hours to do the body work so far. Hopefully the rest should be done soon . So maybe like 6-8 hours in body work and like another 6 -8 in sanding

Sent from my SPH-L720 using Tapatalk

soul_popper
08-23-2016, 10:24 AM
Before

http://uploads.tapatalk-cdn.com/20160823/556512d9cb3d2af01eeaf5392d2c2eca.jpg

After

http://uploads.tapatalk-cdn.com/20160823/ac67c9c0305ce419a604360ace45bc99.jpg


I might change it eventually to white with the honda logo in chrome red

Sent from my SPH-L720 using Tapatalk

Tdurr
08-24-2016, 07:26 PM
I like this reverse

Dr_Snooz
08-27-2016, 10:07 AM
Nice work!

soul_popper
09-06-2016, 09:55 AM
Nice work!
Thanks man

Sent from my SPH-L720 using Tapatalk

soul_popper
09-06-2016, 10:03 AM
So haven't worked on the car much but i did manage to do most the bondo. I might have to do a bit more after sanding but haven't been able to sand yet cause its still a bit tacky so it clogs the sand paper. So ill just wait till its completly cured. Other then that i just need to do the rocker panels.

http://uploads.tapatalk-cdn.com/20160906/ad3f2a867c71b201449e1b6cc1171c1b.jpg

http://uploads.tapatalk-cdn.com/20160906/07377c2bf01e129727d76c47a844af88.jpg

http://uploads.tapatalk-cdn.com/20160906/d82e19d733d4cce78455dbab16cf0c0e.jpg

http://uploads.tapatalk-cdn.com/20160906/45a7db390b3f5295b12daba0d203e55b.jpg

Sent from my SPH-L720 using Tapatalk

soul_popper
09-06-2016, 10:11 AM
Goals for the car in the end is to be as clean as my previous car , a civic hatch or my pops jeep with a ford 5.0 in it

http://uploads.tapatalk-cdn.com/20160906/ac591febbebf003eb3f1d5e05fe0e5c8.jpg

http://uploads.tapatalk-cdn.com/20160906/e78dd0b12f2a475c36265a16006e4a3d.jpg

http://uploads.tapatalk-cdn.com/20160906/e2dc598016161dd3dbad44303d977221.jpg



Sent from my SPH-L720 using Tapatalk

MessyHonda
09-12-2016, 07:10 PM
its gonna be worth the wait

JJ'sAccord
12-15-2016, 02:58 PM
Goals for the car in the end is to be as clean as my previous car , a civic hatch or my pops jeep with a ford 5.0 in it

http://uploads.tapatalk-cdn.com/20160906/ac591febbebf003eb3f1d5e05fe0e5c8.jpg

http://uploads.tapatalk-cdn.com/20160906/e78dd0b12f2a475c36265a16006e4a3d.jpg

http://uploads.tapatalk-cdn.com/20160906/e2dc598016161dd3dbad44303d977221.jpg



Sent from my SPH-L720 using Tapatalk

Whats the progress on the car? just curious.....

Shane86
05-23-2017, 10:24 PM
how's progress going

88LXi68
06-05-2017, 10:45 AM
I think I saw this car for sale on the local Craigslist.

soul_popper
06-08-2017, 06:20 PM
Sadly i did end up selling my accord, but at least it ended up being my best friend who bought the car so i still get to work on it and drive it every once in a while. As for progress ill update soon with photos

tof
06-09-2017, 05:59 AM
Looking forward to the pics. Sorry the car had to go but glad to hear it is still in the extended family.

soul_popper
06-12-2017, 12:52 PM
Update

Before i sold it to my buddy i painted most of it with spray paint to seal it and prevent rust.


8352

8353

8354



After i sold it to my friend he replaced the belts and finished painting it black and some more.

8355

8356

8357

8358

8359

soul_popper
06-12-2017, 01:22 PM
8360


8361


We made a chop top honda.


8362

we were going to add that roll bar and shorten it to make it work but my buddy decided to wait. Plans are to keep it with the convertible vibe going and then make it into a truck with a functioning tailgate.


8363


8364

We made a bikini top from a tarp and left over steel pipping from a canopy thing my friend had lying around and also added a flag pole

8365

soul_popper
06-12-2017, 01:42 PM
8366

8367

8368

Shift knob is a mini beer tap thats shaped as a Nitrous bottle. whats neat is he can just change it off with different taps since he gets the taps for free.


83698369

We also added a hood stack probably hard to see ill add more pics soon

Future plans for the accord now are

Relocate battery
make a push bar
finish bikini top by replacing tarp with canvas
swap in lower mileage engine
turbo it
finish making it into a pick up and body work

tof
06-12-2017, 05:16 PM
Well, that's *um* interesting.

Actually seeing your work on the Civic I can't wait to see how the car...er...pickup turns out. Old school Ridgeline? Or Hi-po Jolly.

Honda#1
06-12-2017, 06:53 PM
Looking interesting. One of a kind!