Converting my 85 accord to fuel injection.

[Miguel220]

I have an 85 accord lx hatch 1.8L with a three barrel carb. I'm trying to figure out how to do the wiring for fuel injected what I all need to get together I'm going to use an a20 cylinder head off another accord at the wrecking replace the the seals and gasket intake manifold exhaust ecru after that what would I need to make this conversion possible.

[knifemind]

You cannot use an A20 head on your block. The block refresh during the transition from E series to A series had one dramatic change to oiling passages and can bee seen by comparing the two head gaskets.


E style:
http://i92.photobucket.com/albums/l5/knifemind/85%20Prelude/E%20gasket.jpg (http://s92.photobucket.com/user/knifemind/media/85%20Prelude/E%20gasket.jpg.html)

A Style:
http://i92.photobucket.com/albums/l5/knifemind/85%20Prelude/A%20gasket.jpg (http://s92.photobucket.com/user/knifemind/media/85%20Prelude/A%20gasket.jpg.html)

You can see that "E" style heads have only one main "hump" along the back of the block, but "A" style (BS & BT [and very late ET2] are "A" style) heads have two.