Johnkowsky
12-10-2016, 12:27 PM
In light of recent developments (my hatch growing legs and running away to Neverland), I've decided to put my SE-i up for sale.
The plan was to transfer all the aftermarket parts to and do a rear disc swap on the hatch, but it doesn't work without a hatch.
Car is located in Vancouver, BC.
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5383.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5377.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5375.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5368.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5380.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5381.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5382.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
The stats: (***=updates)
Bad bits:
- ***346,000km on the body***
- paint is pretty rough, but surprisingly little rust on the wheel wells
- the car starts, runs and drives, but the tranny only has 1st-3rd (will probably need to be towed or trailed)
- driver's seat is in very rough shape
Good bits:
- 1/2" lowering springs all four corners w/ Koni Reds and Tokico Blues ***had a look as I was swapping wheels and the shocks are super mint, paint is still glossy, and warning stickers are still on. Guessing 1000km or less on them.***
- Functioning rear discs ready to swap
- Aftermarket header (possibly DC Sports, will need help from the forum to confirm)
- MSD Ignition Coil
- Sunroof
- Working AC
- Proper CAI w/ piping routed to fender well
- Block heater
***Junk in the trunk***
- full set of chrome fender accents, never installed
- mud flaps
- assorted weather seals
- exhaust gasket
- combo switches
***Will add more details about parts in the trunk and photos of the suspension parts, car will come on steel wheels, not the ones that are pictured.***
Super hard to find these in Canada, I've only seen mine and two others on the streets in BC and another at a wrecker in Kelowna a while back.
Want to sell the car as a whole not super into parting out.
$1000 CAD
Let me know if there are any questions, thanks!
The plan was to transfer all the aftermarket parts to and do a rear disc swap on the hatch, but it doesn't work without a hatch.
Car is located in Vancouver, BC.
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5383.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5377.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5375.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5368.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5380.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5381.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5382.jpg
http://vectorfinesse.com/wp-content/uploads/2016/12/IMG_5379.jpg
The stats: (***=updates)
Bad bits:
- ***346,000km on the body***
- paint is pretty rough, but surprisingly little rust on the wheel wells
- the car starts, runs and drives, but the tranny only has 1st-3rd (will probably need to be towed or trailed)
- driver's seat is in very rough shape
Good bits:
- 1/2" lowering springs all four corners w/ Koni Reds and Tokico Blues ***had a look as I was swapping wheels and the shocks are super mint, paint is still glossy, and warning stickers are still on. Guessing 1000km or less on them.***
- Functioning rear discs ready to swap
- Aftermarket header (possibly DC Sports, will need help from the forum to confirm)
- MSD Ignition Coil
- Sunroof
- Working AC
- Proper CAI w/ piping routed to fender well
- Block heater
***Junk in the trunk***
- full set of chrome fender accents, never installed
- mud flaps
- assorted weather seals
- exhaust gasket
- combo switches
***Will add more details about parts in the trunk and photos of the suspension parts, car will come on steel wheels, not the ones that are pictured.***
Super hard to find these in Canada, I've only seen mine and two others on the streets in BC and another at a wrecker in Kelowna a while back.
Want to sell the car as a whole not super into parting out.
$1000 CAD
Let me know if there are any questions, thanks!