Vacuum Advance Diaphragm

[89hatchieaccord]

89 Accord DX manual, carb. I was under the hood today and noticed that one of the hoses on the vacuum advance diaphragm had broken off. I don't know how long it has been like this. I need to either replace or adjust the throttle cable to get the car running again. Extremely limited budget and won't be able to get a new vacuum advance right away so can I run the car with that busted line or will it do more damage? Is there a way I can rig it up? I'm pretty new at all this and learning as I go. Thanks.

The picture attached doesn't show it well but the little nozzle thing that the hose slips over on the diaphragm is broken off and missing.

http://uploads.tapatalk-cdn.com/20161224/22ae54e6334ada11cd4fa20dcb18d691.jpg

[Dr_Snooz]

You'll probably notice some rough idling. Not much else really. It is a vacuum leak, which you don't want. Ideally you should fix it but if funds are super tight, ignore it.

[89hatchieaccord]

Will it cause damage if left unfixed?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Dr_Snooz]

Probably not if you drive sensibly.

[89hatchieaccord]

Thanks.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[JJ'sAccord]

7956 look7956like you have a tec distributor
7957 name brand of distributor here

[89hatchieaccord]

Mine looks slightly different. Couldn't find a brand name on it

https://uploads.tapatalk-cdn.com/20170110/6da7cc666414e599ffcb5c197522a7a5.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk

[JJ'sAccord]

7958 the dx has thee one you need.... just not sure if it works lol

[89hatchieaccord]

Lol heard that. I feel like I need to buy another dx just for parts lol

Sent from my SAMSUNG-SM-G930A using Tapatalk