View Full Version : bar at back of engine
Mantis88LX
02-08-2003, 07:46 AM
i forgot what its call but its the bar that connects to the engine then to the firewall. i was wondering do the LXi's had thicker or stonger ones. any idea?
also does the LXI have better or thinker motor mounts?
AZmike
02-08-2003, 09:49 AM
They're probably exactly the same. I doubt Honda would waste money designing and manufactuing two sets of engine mounts for two cars that are nearly identical.
DBMaster
02-08-2003, 12:54 PM
I would concur. The horsepower difference between the carbed and FI engine was not so extreme as to warrant stronger mounts.
Mantis88LX
02-08-2003, 07:08 PM
are those bars soposed to have some play in them at the engine side? becasue i can lift up on it and slide it around and shit.
carotman
02-08-2003, 07:27 PM
All the torque bars are the same.
AccordEpicenter
02-10-2003, 01:23 PM
yeah therye supposed to be able to move around
88LXi/87CRXSi
02-10-2003, 02:18 PM
I replaced my torque strut insulators, and I now I can't move mine, at least not with my hand. My engine was twisting too much when I was at 4k to 6k, even with new mounts, till I replaced mine. Oh, the small one on mine was probably still good, but the larger one, on the engine was beat to shit on mine.
-Steve
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.