PDA

View Full Version : Combination Swicth failed, low beams not working.



1989accordaz
01-21-2018, 05:40 PM
It had been giving me problems for a while, it was very touchy. Then one night after work it at night the low beams didn't work. So I drove home with the hi beams for 20 min. Went to the JY today and found one, replaced it and all is good now. Not bad for 9 dls. Once you remove the emblem from the steering wheel there is a 19 mm that needs to come off, us an extension. Disconnecting the connectors above the fuse box can be a pain, but the best way for me is to use flat head screwdrivet to push the tab and turn the screwdriver to separate the connectors. Pics can also work well.