View Full Version : 1986 Hatch LXi 5 speed
87rustbucket
04-13-2018, 01:11 PM
I've done I lot to this car to get it back on the road from sitting outside for 2 years. Right now I'm replacing the head gasket after I found my oil with just a little foam in it last time I changed the oil. After watching some guys on youtube porting their heads and seeing how easy it seamed all be it a little time consuming, i got the crazy idea to port the head in my car while I had the head off. Now my car is in all sorts of pieces but the head looks really nice though.
https://imgur.com/jnZkwcD
https://i.imgur.com/KUFffwJ.jpg
https://i.imgur.com/bjz7HDZ.jpg
https://i.imgur.com/WqMTGkA.jpg
https://i.imgur.com/xLW1QE7.jpg
87rustbucket
04-13-2018, 01:15 PM
https://youtu.be/1FekCpaiuW0
I tried to get some of the intake manifold too
Shane86
04-13-2018, 02:49 PM
Looks good 👍
Dr_Snooz
04-13-2018, 06:39 PM
Way cool!
87rustbucket
04-13-2018, 09:56 PM
Lapping the valves took a little more than i expected finding minor pits it the valve seats(probably from sitting for 2 years doing nothing) but after lapping the valves I got good seats on all the valves. I'm also replacing the the valve stem seals along with the camshaft seal.
Lapping the valves
https://i.imgur.com/VMPpHee.jpg
New valve stem seals
https://i.imgur.com/g8zMys4.jpg
Valve springs going back on
https://i.imgur.com/0Vtg9Yu.jpg
All back together again
https://i.imgur.com/V0eb6Lf.jpg
Dr_Snooz
04-15-2018, 06:02 PM
You know, of all the work I've done on cars, I've never rebuilt a head. There are just too many special and expensive tools required. I always take them in. Nice work!
87rustbucket
04-16-2018, 09:00 AM
You know, of all the work I've done on cars, I've never rebuilt a head. There are just too many special and expensive tools required. I always take them in. Nice work!
It wasn't that expensive, $20 for a cheap Dremel another $20 for some sanding and polishing bits, $20 for valve spring compressor tool, $15 for valve lapping tool and compound, and a wire wheel grinder is nice but not necessarily. Of course a head gasket kit that came with all the gaskets, seals, and O-rings I needed.
87rustbucket
04-16-2018, 09:02 AM
It's a time consuming process though, took me close to a week
Dr_Snooz
04-18-2018, 05:05 PM
I guess I read all that stuff in the manual about grinding valves with multiple angles and so forth and just said, "Nope."
87rustbucket
04-24-2018, 11:21 AM
If you want to go all out you could replace the valves and get the valve seats machined and resurface the head. But I just cleaned the surface really good and lapped the valve seats.
87rustbucket
04-24-2018, 11:37 AM
Just got this test pipe, to do a cat delete.
https://i.imgur.com/WQQGPu7.jpg
https://i.imgur.com/1x4cLAg.jpg
https://i.imgur.com/Y9Q5cCR.jpg
https://i.imgur.com/wI2VrXV.jpg
https://i.imgur.com/j1v9QXu.jpg
It is listed to fit a 90-93 Accord, and looked like it might fit my car but it DOESN'T FIT the stock exhaust because one of the flanges is rotated different. However when I get my new OBX header it will work, can't wait.
87rustbucket
04-24-2018, 02:03 PM
I guess I should post some pics of the actual car☺
She's a little dirty, but she's a working car.
https://i.imgur.com/YxHZp63.jpg
https://i.imgur.com/QS6lThB.jpg
Shane86
04-26-2018, 04:39 AM
I guess I should post some pics of the actual car☺
She's a little dirty, but she's a working car.
https://i.imgur.com/YxHZp63.jpg
https://i.imgur.com/QS6lThB.jpg
How did you post pictures. I'm having problems uploading them
87rustbucket
04-26-2018, 10:07 AM
How did you post pictures. I'm having problems uploading them
I post them on Imgur first, then use the link to post it here, and uncheck "retrieve remote file"
Shane86
04-27-2018, 05:56 AM
I post them on Imgur first, then use the link to post it here, and uncheck "retrieve remote file"
Cool thanks
87rustbucket
04-28-2018, 01:16 PM
My OBX header arrived and so did my heat wrap
First I sealed the slip fittings on it with extreme hear JBweld.
https://i.imgur.com/hdmR1Cw.jpg
Then I sprayed it with hi-temp silicone coating.
https://i.imgur.com/XtGJrJV.jpg
https://i.imgur.com/Zo8uTiD.jpg
Then I wrapped it and sprayed it again.
https://i.imgur.com/xr4jvMw.jpg
https://i.imgur.com/2xD3zSK.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.