Dcoe intake (legit)

[InAccordance]

A20 dcoe intake - Album on Imgur (http://imgur.com/gallery/71DVD6v)

Cost 312$ after exchange rate. May be more or less depending on the current rates.

danstengineering.co.uk/index.php?route=product/product&search=A20&product_id=1190

Now that he has the pattern, you guys can order one at any time.

Oh, and I should mention; the studs dont come with it, I put those on. Test fitting a few lengths to see what will fit best.

[gcovarrubias412]

A20 dcoe intake - Album on Imgur (http://imgur.com/gallery/71DVD6v)

There it is. Cost 235 pounds Sterling which at the time was 312$.

So if i put that on an es2 with dcoes, would it work?

[InAccordance]

So if i put that on an es2 with dcoes, would it work?

Don't think so, intake pattern looks different. Looks like the es2 has round ports.

[gcovarrubias412]

Don't think so, intake pattern looks different. Looks like the es2 has round ports.

Oh dang, i was thinking exhaust ports for some reason.

[InAccordance]

Just do what I did, email him and ask...
I mailed him an intake gasket from an a20 and a few weeks later had the intake in hand. Even sent me my gasket back.
You can get a gasket for an ES off rockauto for like a dollar and change.

[Fixedit]

This is amazing, thank you for having it created and produced! Would very much rather go this route than a weber 38/38 on a modified stock intake.

[InAccordance]

I mean, a 38 is still great for mild mods and such.
I have major internal engine plans for this old girl so i opted to go the dcoe route to cover future work.
Plus, I had already bought the carbs and wasn't about to let them go to waste =D