Bee R Limiter

[86_Accord_Lxi]

Anyone installed a Bee R limiter on an A20A3 before? looking for a pinout of the ECU. thanks!

[night]

Google around for honda helms download. There are multiple websites and a thread here.

[86_Accord_Lxi]

been using google, couldnt find much so i turned here. thanks

[Shane86]

iBuilt Racing: 1986-1987 Accord A20A3 ECU Pinout (http://ibuiltracing.blogspot.com/2010/10/1986-1987-accord-a20a3-ecu-pinout.html?m=1)

[86_Accord_Lxi]

iBuilt Racing: 1986-1987 Accord A20A3 ECU Pinout (http://ibuiltracing.blogspot.com/2010/10/1986-1987-accord-a20a3-ecu-pinout.html?m=1)

thank you so much!

[Shane86]

thank you so much!

No problem be sure to keep us updated get everything hooked up

[night]

Ya, ive never heard of the thing before but def nice to have with high compression.

[Shane86]

It's a pretty good feature I like it. I've never used this box.but should help with not spinning the tires too much getting off the line

[86_Accord_Lxi]

Do you have an ignition cut limiter or 2 step installed on yours?

[Shane86]

Do you have an ignition cut limiter or 2 step installed on yours?

Both Two Step rev limiter launch control I use fuel cut though. I use it to hold the RPMs at a certain level for takeoffs. Mine is hooked up to a on-off switch when I go past 8 miles an hour it disengages

[86_Accord_Lxi]

Both Two Step rev limiter launch control I use fuel cut though. I use it to hold the RPMs at a certain level for takeoffs. Mine is hooked up to a on-off switch when I go past 8 miles an hour it disengages

ah ok. im not seeing the pins i need to splice into on the pinout though. 9062
those are the wires on the limiter and what they do. handbrake is just a signal it uses to know when to actuate.

[Shane86]

RPM signal is going to be the blue wire in the engine bay to the coil

[86_Accord_Lxi]

RPM signal is going to be the blue wire in the engine bay to the coil

yep, just trying to be sure it will work before i buy it. i dont want to have a 250$ fancy box that does nothing lol

[Shane86]

yep, just trying to be sure it will work before i buy it. i dont want to have a 250$ fancy box that does nothing lol

Be sure to do some more research on it. For that kind of money it would be a good start towards a OBD1 conversion and have all those features and the ability to fully tune the car