PDA

View Full Version : Progress CS2 coil overs 86 LXi



86_Accord_Lxi
01-13-2019, 11:48 AM
just finished up putting Progress CS2 coil overs on the accord! time to go get an alignment.

rushell
01-13-2019, 05:19 PM
where did u get them and for what car r they for also how much did they cost

86_Accord_Lxi
01-14-2019, 04:51 PM
where did u get them and for what car r they for also how much did they cost

Got them from THMotorsport.com, they are for a 92-00 civic. Some modification is required to make them fit. they were about 570$

Shane86
01-15-2019, 03:50 PM
Looks good

86_Accord_Lxi
01-17-2019, 04:32 AM
Looks good
Thanks man, I’ve since raised the rear end up about a half inch. Now I’m in search of some new wheels!

B0CKS
01-17-2019, 06:11 AM
Thanks man, I’ve since raised the rear end up about a half inch. Now I’m in search of some new wheels!

I dig the look man! Way to get creative with the coilovers, can't wait to see what ends up replacing the phone-dials!

86_Accord_Lxi
01-17-2019, 03:05 PM
I dig the look man! Way to get creative with the coilovers, can't wait to see what ends up replacing the phone-dials!

Thank you, any suggestions on wheels?

InAccordance
01-18-2019, 07:39 PM
I like these, they're in my top 3 when I get wheels soon.
https://www.carid.com/ns-series-wheels/ns1202-white-machined-lip-55328272.html

baruch1
01-19-2019, 04:50 AM
Got them from THMotorsport.com, they are for a 92-00 civic. Some modification is required to make them fit. they were about 570$What type of modifications was needed for them to fit? Currently in the market for some Coilovers myself.

Sent from my ONEPLUS A6013 using Tapatalk

86_Accord_Lxi
01-19-2019, 01:17 PM
What type of modifications was needed for them to fit? Currently in the market for some Coilovers myself.

Sent from my ONEPLUS A6013 using Tapatalk

for the rears: the fork is wider than the stock one, so you have to put washers in it to tighten it up onto the lower control arm. not a big deal very easy to do.
for the fronts: the cup on the bottom of the shock body is too large to fit into the stock fork on the front. you can take the cup off of the shock body. i took mine off and machined them down to a smaller diameter to fit inside my stock forks.

other than that they bolted up fine with the use of my original top hats.

rushell
01-19-2019, 05:19 PM
ok thanks a lot tax time is coming

Fixedit
01-21-2019, 07:17 PM
Getting new rims eh? You interested in selling the phone dials? Hahah, and I like Traklite Gears, they'd look great in silver on the hatch!

https://extremewheels.com/product/traklite-gear-silver-17x7-5-45-5x114-3/

86_Accord_Lxi
01-22-2019, 06:51 PM
Getting new rims eh? You interested in selling the phone dials? Hahah, and I like Traklite Gears, they'd look great in silver on the hatch!

https://extremewheels.com/product/traklite-gear-silver-17x7-5-45-5x114-3/

yeah i will be interested in selling them as soon as im on a new setup. i will post them on here when i get ready to let them go.

glutenfree
08-20-2020, 06:29 PM
How is the ride handling with these coil-overs installed? I am considering this mod but hesitant as it seems most coil-overs for our rides offer a rougher riding suspension over stock. I am leaning more towards a set of H&R springs with a decent set of struts though

tia!