lx 1986
03-19-2019, 08:39 PM
Have a 86 accord lx, auto, 2bbl keihin carb
I tested my ignition coil not sure if my specs came out right. Can someone tell me if I set my meter correctly? Would really help me.
Honda manual says:
Primary winding resistance for terminal A and D:
1.215-1.485 ohms
Secondary winding resistance for terminal A and secondary winding resistance:
11.074-11.526 ohms
Resistance Between B and D terminal:
2.200 ohms
Check for continuity between A and C
------------------------------------------------------
Mines tested as:
A and D: 1.6
meter was set at 200 ohms
A and secondary: 11.91 ohms
meter was set at 20K
B and D: 2.17
meter was set at 20K ohms
Continuity 003
Were my meter setting right or did I get a wrong reading? If my meter settings are wrong could you give me correct settings for meter.
I tested my ignition coil not sure if my specs came out right. Can someone tell me if I set my meter correctly? Would really help me.
Honda manual says:
Primary winding resistance for terminal A and D:
1.215-1.485 ohms
Secondary winding resistance for terminal A and secondary winding resistance:
11.074-11.526 ohms
Resistance Between B and D terminal:
2.200 ohms
Check for continuity between A and C
------------------------------------------------------
Mines tested as:
A and D: 1.6
meter was set at 200 ohms
A and secondary: 11.91 ohms
meter was set at 20K
B and D: 2.17
meter was set at 20K ohms
Continuity 003
Were my meter setting right or did I get a wrong reading? If my meter settings are wrong could you give me correct settings for meter.