removed vac lines now carb wont work right

[carberlx89]

i removed the vac lines just like the how to saidf to and i did the secondary conversion i removed the choke but now my choke is screwed my car will either idle extremly high or not at all my choke just either stays open or closed how cani fix this or any advice i have stop carb

[A20A1]

What part of the choke did you remove?
This is how it should look with the choke still installed.

http://www.geocities.com/accord89lx/keihinvacuum.html

[shepherd79]

most likely you didn't remove choke plate itself and it is close so it doesn't idle.
you have to remove choke plate itself, this will eliminate choke 100%.
make sure you adjust the idle screw and mixture screw.

[carberlx89]

ill try tAKING THE CHOKE PLATE OUT AND SEE IF THAT WORKS