Pacesetter headers 3g accord/2g prelude

[Havoc_Wolfy]

looking to sell a Pacesetter header for a 3rd gen accord or 2nd gen prelude (a20 engine). Extremely minor surface rust around the edges. previous owner had them painted with high temperature paint so the metal has been protected very well, the paint has started to flake off in some places and will need to be re-done. yes yes i know..... the paint on it is a ricers dream, it need to go away anyways. Make me an offer. I would prefere local pickup in Orange County california, but if you are interested, i can see about shipping it out too.

pictures Here: https://imgur.com/a/yd34O4W

[randisimo]

Still have them?

[Havoc_Wolfy]

Still have them?

yes as of right now, i still have them. I did forget to note in the original post, the second o2 sensor hole, and the second EGR pipe(? I dont know what it is. i think its for carbed cars) were welded closed. im not sure if it can be drilled out and re-tapped. so as they sit right now, they will only be a direct bolt in for fuel injected 2nd gen preludes, and the 86-87 pre-facelift fuel injected accords.

both welded holes are shown clearly in the pictures.

[Havoc_Wolfy]

bump, Still available

[Dr_Snooz]

https://i.imgur.com/yjjh6zC.jpeg

https://i.imgur.com/ZKtfW16.jpeg

https://i.imgur.com/vk3xbDg.jpeg

https://i.imgur.com/TUYeuUn.jpeg

https://i.imgur.com/0TOPQQV.jpeg

https://i.imgur.com/lLiK5J0.jpeg

[Fixedit]

PM sent

[Vinny556]

How much?