PDA

View Full Version : Temp sensor size


InAccordance
10-17-2019, 03:22 PM
Is it 1/8 npt?
AWH
10-17-2019, 05:34 PM
I believe it should be. Same as oil temp. sensor.

Verstuurd vanaf mijn H8314 met Tapatalk
InAccordance
10-18-2019, 12:31 AM
cool, thanks. If so, found the solution to my temp sensor =P
Oldblueaccord
10-18-2019, 06:06 AM
1/8 and BPST is really close,but im not sure what it is either.
InAccordance
10-28-2019, 07:07 PM
It seems it is confirmed to be 1/8NPT. Took a shot in the dark and bought an inline sensor housing. Works like a charm, gauge works again!
The housing is 26mm.
https://i.imgur.com/dlR9PPNl.jpg

All told, cost 13$ for housing and a new sensor.
Dr_Snooz
10-28-2019, 07:41 PM
Pretty fancy for what is basically a hillbilly rig. ;-)
InAccordance
10-28-2019, 08:00 PM
I tried using the thermostat housing but the sensor isnt long enough to make good contact with the coolant. Really isn't anywhere else to put a sensor that's before the radiator to get a good reading.
Carb model; the sensor is in the intake since coolant flows through it but that's long gone =P