PDA

View Full Version : More pics of Kustom89's ride



Mike89Accordcom
03-03-2003, 12:38 AM
Here is a couple more of Kustom89LXI's ride,

http://www.89accord.com/special/door.jpg

http://www.89accord.com/special/door2.jpg

A20A1
03-03-2003, 12:43 AM
nice... going to shave it all the way and make a coupe?

solbmxaccord
03-03-2003, 01:23 PM
how much does it cost to shave stuff...or how would i go about doing it..i wanna shave my door handles and molding

solbmxaccord
03-05-2003, 05:27 AM
i guess no one knows...well peace

Grant2k
03-05-2003, 08:03 AM
if you do it yourself, it costs as much as the supplies. if you need to rent a welder, bondo, resin, sandpaper, primer, everything you need for regualr body work.

kustom89lxi
03-05-2003, 03:28 PM
yea thats about right

MarioBurke
03-05-2003, 03:43 PM
so I am considering shaving my door handles which doesnt seem that hard. my question is what kinda mechanism do you use to open the doors after the handles are shaved off? Nice work on the car!

myaccord7
03-05-2003, 03:53 PM
you dont tape off areas when you spary primer. it leaves lines.

myaccord7
03-05-2003, 03:55 PM
but still looking good.

kustom89lxi
03-05-2003, 06:30 PM
u wet sand the edges down

kustom89lxi
03-05-2003, 06:32 PM
for mario all u have to buy is poppers

TJ89Accord
03-05-2003, 10:41 PM
Has anyone shave the door handles with fiberglass? Or does everyone just weld over them? Just wonderin...

tim

kustom89lxi
03-06-2003, 01:54 AM
well i welded a piece of sheet metal in there fiberglass might crack after a while

original2k
03-06-2003, 05:55 AM
lol i was wondering the same thing about door poppers, but i was trying to figure out more of how he gets in and out of the car now? i would guess maybe he has more than 1 car, but imagine driving it some where and locking the door.....................NOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOO! HAHAH, oh well that was stupid and it'll prolly never happen but what if? :D

MarioBurke
03-06-2003, 10:11 AM
Ok two more questions for you. What Gauge was the sheet metal you used on the doors and how exactly does the popper work? What activates it?

kustom89lxi
03-06-2003, 03:44 PM
i used 16 gauge sheet metal. And for mario the motor that u buy hooks up to what opens the door itself, and what opens it is a remote control when u press a button it opens

Grant2k
03-06-2003, 03:49 PM
some people leave a cable exposed somewhere that you can't see it, or use the handles off car like a Miata that is tiny and you can hide easily in a fenderwell or under the car. but like he said, most people seem to use a remote activated sollenoid.

wprocomp
03-06-2003, 07:53 PM
poppers are easier on the wallet but remote sollenoids are much more convenent and reliable.pops can tend to freeze on you as such happened to our truck=(

MarioBurke
03-06-2003, 08:32 PM
awesome, thanks for all the info