A20 motor build

[dontpanek]

Hey all, IÂ’m new to the forum and havenÂ’t done much digging yet. With that said, IÂ’m looking to build my A20 motor in my 89 Accord LX-i for 15-20 pounds of boost. I know thereÂ’s little aftermarket support for these cars so looking for some support. I know new internals are a must. IÂ’m looking to build this right. Also looking for clear tail lights which I saw might be source-able. Any and all help is appreciated!!

[Oldblueaccord]

Hey all, IÂ’m new to the forum and havenÂ’t done much digging yet. With that said, IÂ’m looking to build my A20 motor in my 89 Accord LX-i for 15-20 pounds of boost. I know thereÂ’s little aftermarket support for these cars so looking for some support. I know new internals are a must. IÂ’m looking to build this right. Also looking for clear tail lights which I saw might be source-able. Any and all help is appreciated!!

https://www.3geez.com/forum/showthread.php/147548-A20-motor-build-threads

This link is in the performance section.

I think 15 lbs of boost you may have head gasket problems but do you research.

[ShiRen]

89T is running like 30, that's way too high for street and it will still push out the head gasket, but I think head studs are all you need for 20psi. Arp 218-4703
As for the rods and pistons... good luck, unless you start putting B series parts in it. https://www.3geez.com/forum/showthread.php/148427-A20-details-and-B20-rods-pistons-thread

[Shane86]

Welcome looking forward to updates on the project