PDA

View Full Version : Alternator belt install???


greekguy7
03-19-2003, 05:08 AM
I would like to replace the alternator belt on my 87 Accord LXi.

Just from a quick glance, it looks like I need to remove the air conditioning belt and the power steering belt before I can just replace the alternator belt.

Is this correct?? Any tips would be appreciated.
ACCORD EX
03-19-2003, 07:00 AM
yeah i think so !

MIKE
DBMaster
03-19-2003, 07:55 AM
Take off the plastic splash pan. It will make accessing the compressor bolts possible. you actually have to pry the P/S pump with a pry bar to tighten that belt as it has no tensioner bolt.

If you ask me, I don't know why Honda couldn't have used a serpentine belt. I never had any problems with the one on our Escort. One belt for everything and it takes five minutes to change it. Just pull back the spring tensioner with a 3/8" ratchet handle and off comes the belt. Even our 99 Oasis (With the 2.3 liter Honda VTEC motor) still has two belts.
greekguy7
03-19-2003, 11:16 AM
What plastic splash pan are you referring to? sorry... i did not go take a quick look at it yet...

I agree... a serpentine belt makes life so much easier.
anchovies
03-19-2003, 10:28 PM
Originally posted by greekguy7
What plastic splash pan are you referring to? sorry... i did not go take a quick look at it yet...

I agree... a serpentine belt makes life so much easier.

It under the car (if it's still there). Need to remove it to have access.
ACCORD EX
03-20-2003, 05:18 AM
you mean under teh engine ?

MIKE