Accel 060 Jet and car pics

[Mike's89AccordLX]

Hey guys I have no clue on how to post pics. I have a 3 in 1 printer so I can scan pics and send them to someone (in JPG format) So if someone could please host these pics for me that would be sweet. A20A1 wanted to see the Accel pump jet, so if you won't do it for me... do it for him :sadwave: Anyone??? :stick:

[blazin3gen]

[email protected]

[Mike's89AccordLX]

I send you a pic so hopefully it works.

[blazin3gen]

it did work here it is send more pics if u want

http://www.geocities.com/hitman194/AccelJet060.txt

[Mike's89AccordLX]

I will send you some more pics. I found some old pics of my car. There have been some mods done to it since these pics were taken.

[blazin3gen]

alrighty im gonna go to sleep in like another 30 mins so i'll wait :)

[Mike's89AccordLX]

should I send them to you all at a time? I have 5 pics right now.

[blazin3gen]

send me like 2 or three emails with like 2 or 3 in each

[Mike's89AccordLX]

Alright since I took these pics I have painted my valvecover and oil cap and honda emblem on the valvecover. I installed the Weber intake instead of the original one. I have installed my headers and straight pipe. I have also installed my SE-i console and seatcovers. I will have some more pics soon. Hopefully really soon. What do you guys think of my 3G?

[blazin3gen]

http://www.geocities.com/hitman194/car1.txt
http://www.geocities.com/hitman194/car2.txt
http://www.geocities.com/hitman194/car3.txt
http://www.geocities.com/hitman194/car4.txt
http://www.geocities.com/hitman194/car5.txt

[Mike's89AccordLX]

It looks better now than then. I will have to get some more pics taken when it's nice out. Thanks for posting them.

[blazin3gen]

No Prob man O and nice Engine set up looks Great! im gonna go to sleep now, holly snap i just notice i made LX user today WOO WOO

[Grant2k]

looks good. let's see the outside!

[A20A1]

Damn...

you even put a filter on the AS valve... hehe

Are those Accel 300+ wires?

anyways the jet look really close to the .55 pump jet which is nice to know.
It's not a double pumper is it?
like both of the ports have been drilled out on each of the arms

[Mike's89AccordLX]

It's a double pumper. I had a pic of 3 different angles but only that one turned out. And they are Toucan plug wires. Yeah I figured it would look badass to put another K&N filter on my car (it even has it's own heat shield :D) And the outside of the car is so so. My drivers side has a big key mark from front to back and it has a little rust but not much. I am using the money for the paint job to go to the Ontario meet unless I get this job at this tire shop and then I would be working 5 days a week and I should be able to afford a nice paint job.

[A20A1]

shiaaaaaaat.... my 55 only has one of the arms drilled. I'll trade you. :D

[Mike's89AccordLX]

Hehehe it was only like $12 too :D

So do you think the car looks ok? I was kinda scared to post it with all of the hating going on lately. :)

[Grant2k]

Originally posted by Mike's89AccordLX


So do you think the car looks ok? I was kinda scared to post it with all of the hating going on lately. :)
you didn't hype yours up like it was the best thing since....my car. so your safe.

[Mike's89AccordLX]

Oh I forgot to do that :) My car is like 3000hp b/c I have 6 things in my car that say Type R :lol: Actually I'm not certain what hp it is but I doubt it's anywhere near 3K hp. I can't wait to get it painted and have my SI rims done though. I just found someone near me that does bead blasting so I gotta find out how much he want for four rims and hopefully he powder coats too. If not I know another guy that does. I have the champagne color car and I will keep that color when I get it painted. So I don't know what color I will get the rims done.

[A20A1]

Wait they are toucan wires... but are they for our year accord or a different honda? I was thinking of going with the 300+ Accel wires... but i needed to find a car that had simmilar lengths

[Mike's89AccordLX]

They're for the 3G. They were like $75 too. I think when I get my MSD setup I will convert everything to all MSD products. Do you want me to measure the lengths of mine? How big of a wire does Accel and MSD make? I heard there was a wire that was 11mm thick. I wouldn't mind getting the huge ones. Mine are 9mm right now.

[Mantis88LX]

awesome man, when will the hood scoop be on? i want to make one too but im not really sure how. how do u plan on making yours? keep up the good work man :)

[Mike's89AccordLX]

I have the hoodscoop. I was going to make one but I found out how cheap they are at www.jcw.com I have the hole cut out and have it all sanded and I just need to get it painted and have it glued on the hood. And it's not where I expected it to be. (I measured on the hood where the cone filter is and it will be on the elevated part of the hood near the middle of the pass. side. Those are old pics keep in mind. I have 11 pics left on my camera so I might use those up on my car and etc... It's really crappy weather out now so I can't right now.

[1988starter]

Of all the wires I have had the magnecors are my fav 40 bucks ebay:D But my second fav has to be the universal set I got from cranecams.

[dXsquared]

i have some universal length Accel 8.8 mm with RFI supression... they were cut to length so they fit all cars


Travis

[wprocomp]

I have a set of Taylor 8mm wires,they seem to work nicely.I want a weber so damn bad:( damn......oh yeah nice car mike.

[Mike's89AccordLX]

Those are the old pics.

I have a lot more mods done to my baby. I'll try and get you more pics of her. Hope you like.