Gauge pod

[Lt99]

I want a pillar gauge pod ... any one know what will fit our cars?


Plus check out what I just won on ebay!
$30

http://ebay3.ipixmedia.com/abc/M28/_EBAY_1bf09c1c4964646d9059ebe0771c5c10/i-1.JPG

[Mike's89AccordLX]

Alright, I bought a 89-90 CRX Gauge pillar. All you need to do is take a heat gun or hair dryer and heat up the two ends and stick it on the a-frame and it will be moulded onto the pillar. Took me 5 minutes to do. Wear gloves when you do this :) Also I bought it from autometer. I bought it from a local shop though but it's an 89-90 CRX pillar from autometer. Hope this helps.

[shepherd79]

Originally posted by Lt99
Plus check out what I just won on ebay!
$30

http://ebay3.ipixmedia.com/abc/M28/_EBAY_1bf09c1c4964646d9059ebe0771c5c10/i-1.JPG

you got riped. you can get this shit at lowe's for a few bucks.

[Lt99]

NOT if it looks like piece in the pic ...........I have seen some stuff in lowes also ... I have even made a lower screen out of the matterial ..so hopefully i will not "get Ripped ".. and I plan to post pics after I receive it .... And in about 4 weeks should have pics to post of my other project ...adding a hood scoop .

[AccordSi]

I used a Supra gauge pod (can't remember the year). Fit pretty well.