amp question

[Microstreak]

im looking to get a system next. i want to get the aluminum 12 qz from audiobahn, Only problem is that they have 3 or 12 ohm operation. i can't seem to find any amps that operate at that resistance. How can i power these subs if i get them?

[TJ89Accord]

any amp will run at 12 ohms. As far as I know. and if you can find an amp that is 2 ohm stable, you can do the 3 ohm sub. 3 ohms would be MUCH better than the 12 ohm.

tim

[lil 89 Lxi]

heres what u need:P

http://www.crutchfield.com/cgi-bin/S-SfII58vuOfd/ProdView.asp?s=0&cc=01&g=110&id=morephotos&pi=1&i=037A3201Q&display=L

[86hatchbackLXi]

it doesnt have to run exactly at that impedance. if you want 2 of them find an amp that is 1 ohm stable becuase you can run the two of them at 1.5 ohms and you will be fine

[Microstreak]

i see, so if i could get a 1000w, 2ohm amp, that would be fine right? these subs i want are the aluminum 12 in series, ther rms pwr is 1000w and 3/12 ohm operation, thanks for the link lil 89 lxi, but the amp isn't powerful enough. also i have my connections for buyin stuff :) and i don't have any at crutchfield. thanks everybody.