PDA

View Full Version : dynomax muffler



staticpat
05-31-2002, 08:00 AM
finally got some money, gonna get the dynomax super turbo muffler. questions are
where is the best (cheapest) place to order it online?
what offsets do i need to allow it to fit easily?
how much is it gonna cost to have it installed, or can i do it myself?
where can i get a decent tip, and how do i install it onto the muffler?

1988starter
05-31-2002, 09:45 AM
offset in center out as for install I used clamps and some a kit from the HELP company basiacly I used the exhaust strap stuff with the holes put a clamp on the center endput the strip with the holes on the clamp and used the rubber hangers and some screws to mount it it does not move at all. as for the tip I like a brospeed 3 inch roled end.. Nothing bigger IMHO but you might have different taste once again adaperts and a clamp to install later I will get it all welded together.

Cost
Muffler 49.99 auto zone
tip 29.99 pep boys
help kit 3.00
3 clamps 6.00
and adapter 2.00
that is how I did it or you can just take it to a muffler shop and get it done Price get a quote shop around..
http://www.geocities.com/midias2/1988/2002/back2002.txt

hondaaccord_86
05-31-2002, 11:21 AM
hey 1988starter
did it yourself? thats sweet man! it looks good! the price for it was a great deal.

-ed

mag_pbg
06-03-2002, 08:47 AM
So how good does this muffler sounds, and does increase the hp by very much

hondaaccord_86
06-03-2002, 10:50 AM
adding just an exhaust doesn't do. when you change to 2 1/4" pipping, air intake, and exhaust... you'll get some power... not a lot... i said some...
happy hunting

-ed

TeKKnoTeKK
06-03-2002, 10:58 AM
I would say that with performance exhaust, headers, CAI you could expect about 20 HP.....that number could be lower or higher.

1988starter
06-03-2002, 03:09 PM
I enjoy the sound and I made it ajustiable using a big screw and the egr hole in my header I also got some good power but I allready had a intake header accel coil and 2.25 piping oh yea highflow cat.