Shift Knob Question

[89exi]

I am making a shift knob at school for the car. I need to know what size the tread is on the shifter. Any help is much apreciated.

[shepherd79]

just unscrew it and you will see.

[89exi]

Originally posted by shepherd79
just unscrew it and you will see.

Realy never thought of that one:rolleyes:

The car is two hours away till the end of the month, only have access to the lathe and mill till the end of the month.

[MrBen]

You could have said that in your first post. Note you said "any help is much appreciated." Don't need to be a little pussy about it.

Oh and welcome to the board.

[Grant2k]

i am pretty sure it's the same as most other japanese cars. check any other one you have access too.

[89exi]

Originally posted by GhettoAccord
You could have said that in your first post. Note you said "any help is much appreciated." Don't need to be a little pussy about it.

Oh and welcome to the board.

Sorry, wasnt trying to come off as being rude, was having a shitty day with exams comin up quick. But anyways after searching for about 2 hours i finaly found it on the net. Incase anyone ever wants to know its a M10x1.5mm thread. So with any luck, and a bit of skill i'll have a new shifter in the next couple of day. For free.:D