manual conversion question

[89AccordHatch]

I plan on starting my auto----->manual conversion....will i need any special tools..i just happen to run into a webpage that was adertising a "flywheel puller"...i wont need that will i?

[AccordEpicenter]

the flexplate will come off in your very hands when you take off the bolts to it...

[ACCORD EX]

no you won't need it ! but be careful the flywheel is really heavy ! you can find it a bit stucked but with a HAND hit it will come off ( be sure you are holding it ok ! )

MIKE

[accordmanracing]

I did a tranny swap from auto to manual. pretty easy, and you dont need any special tools. sept a torque wrench and 10mm
12 point socket (for pressure plate bolts).




88 lx-i
lowered 1.5 inches
apc intake from 98 gsr
dc sports header
pacesetter high flow cat
motegi mr 7 17" wheels
kumho tires
ebc brake rotors w/ green stuff pads
5 speed