PDA

View Full Version : clear signal lights



merhebi
04-23-2003, 08:32 AM
how do you take that relfector out???
I can't even seem to pop out the light
any tips?

Blue Impact
04-23-2003, 11:18 AM
Well, I'm assuming it must be an 88-89 model you're working on. If that's the case then you can take the lense out. There is a screw in which you're gonna have to loosen up first. It is fairly easy to take out the lense. Ok, here's how to loosen the screw. Take off those plastic pieces at the bottom of the bumper and you'll have to look up from there to locate the screw. Once you've loosen the screw you can then pull the lense out. Once you get the lense to come out, you can splice it open. It'll be much easier if you had a blow dryer and a thin knife or something stiff and thin (flat). Once you can get the clear lense out, then you can get to the orange piece. After getting the orange piece out, putting it back together would be the reverse. I'd say use silicone to seal the lense back together. Oh, the clear kinda silicone. And my apologies if this doesn't make much sense. Good luck.

88' Accord Ltd
04-23-2003, 02:18 PM
I think its in the How-to or FAQ as well.

blazin3gen
04-23-2003, 02:25 PM
yes its right here ;)

http://3geez.com/showthread.php?s=&threadid=104

Tref_LXI
04-24-2003, 04:35 AM
hey can we do this for all of the lenses on the car? Like the back ones also?

SiR
04-24-2003, 06:29 AM
Originally posted by Tref_LXI
hey can we do this for all of the lenses on the car? Like the back ones also?

Nope, I wish they were easy as the bumper ones though.

Tref_LXI
04-24-2003, 11:00 AM
well i know we can take out the reflectors in them, but i wanted to know if its legal. I see people driving around with no reflectors in any of their lights. I think im going to just take out all of the refletors they look super gay.

86AccordLxi
04-24-2003, 11:05 AM
You can take out the amber reflector buy legally you're supposed to have amber lights for your turn signals which means you just have to buy amber bulbs.

Alex

merhebi
04-24-2003, 02:23 PM
i can't seem to the the light out of the damn car to start with...
i found where the screw is
but there is no screw on mine
and they still wont pop out
should i be using much force?

Rendon LX-i
05-05-2003, 10:27 AM
can u do this to a 86 LX-i

Blue Impact
05-05-2003, 12:19 PM
Originally posted by Rendon LX-i
can u do this to a 86 LX-i

No. 86 and 87 are a little different from 88 and 89. This could only be done on 88 or 89 unless you have those year bumpers on your 86 or 87.

wckdonex
05-05-2003, 08:10 PM
just buy the bumper and lights from an 88-89 and put it on your 86. lots have done it. should bolt right on. believe i read it somewhere on here.