PDA

View Full Version : Tuning Up and Cleaning up



LXiRAM87
04-30-2003, 06:26 PM
Hey Men,

Going with a full tune up of the engine. I have already replaced:
1.Plugs
2.Wires
3.Distributer Cap and Rotor
4.Air Filter=Cool Air Intake
5.Oxygen Sensor
6.Ground Wires

Is there anything else that yall can think of that i could replace just to tune up my car?

Bruce :stick:

anchovies
04-30-2003, 10:49 PM
pcv
oil & filter
check air pressure
a nice wash

AZmike
04-30-2003, 10:55 PM
How does your coolant and brake fluid look? Do you know when the fuel filter was replaced last? How do your brake pads and shoes look?

ACCORD EX
05-01-2003, 12:08 AM
check the coil ( in the how to's )
change OIL ( MOBIL 1) oil filter !

MIKE

wthramann
05-01-2003, 08:18 AM
Does anyone even bother checking the valve clearance anymore? I have faithfully done so but have not really ever had to adjust them.

Mike's89AccordLX
05-01-2003, 08:27 AM
Good suggestion. You actually just reminded me to adjust mine. I forgot to after 500 miles with my new camshaft.

ACCORD EX
05-02-2003, 11:24 AM
Originally posted by wthramann
Does anyone even bother checking the valve clearance anymore? I have faithfully done so but have not really ever had to adjust them.

because it's not an easy thing for a lot of people ! :) so we don't tell anyone to do it unless he has bad performance , ticking valves, bad gas milage !

MIKE

badmonkeynobanna
05-02-2003, 09:59 PM
vacuum lines, you can swap them out for silacone, they last longer and you can get them in diferent colors

Lester Lugnut
05-04-2003, 08:16 PM
Ticking valves might indicate loose valves.

3G valves generally do not get looser. They get tighter over time.

LXiRAM87
05-04-2003, 08:35 PM
To tell you the truth I need to replace my fuel filter, but my brake shoes and pads are new. But thanks for yall's thoughts.

Bruce