PDA

View Full Version : Prelude cam???


od2681
05-12-2003, 10:42 AM
hey guys..one of my friends told me that a 87-88 carbeurated prelude camshaft fits perfectly in the 3geez. I was told that they have higher lift. Has anyone done this or knows that it will work... Would it be worth it
thanks in advance
1988starter
05-12-2003, 12:41 PM
I don't know about the carb one but the 84-87 efi one should. In fact I am relatively sure that an 87,88 will not fit
shepherd79
05-12-2003, 01:49 PM
87-89 prelude cams won't fit.
if you have chilton manual, open to page 3-12 and compare the lifts.
od2681
05-12-2003, 11:51 PM
so i should look for 84-87 efi cams then right???
shepherd79
05-13-2003, 03:37 AM
you can get EFI cam, but it will be the same one.
unless you want to regrind it.
anchovies
05-14-2003, 10:19 PM
anyone tried an auto 3g cam into a manual 3g?
pimp86LX
05-15-2003, 02:18 AM
isn't it the same?
Grant2k
05-15-2003, 05:43 AM
the auto and manual are the same but the EFI and carb are different, so yes, they are the same.
pimp86LX
05-15-2003, 05:45 AM
how are they different? Im just guessing but does the EFI cam have a shorter duration?
anchovies
05-15-2003, 10:52 PM
Anyone really sure the auto and manual cams are the same profile or just looking at the numbers provided in chiltons? Someone go mic it an auto. I've got the manual.
shepherd79
05-16-2003, 03:11 AM
here are the lift specs from chilton.
BS-A20A1: manual trany: int-1.5148 exaust- 1.5218
auto trany: int- 1.5174 exaust- 1.5200

BT-A20A3: intake A 1.5296
intake B 1.5198
exaust 1.5274

86 lude manual: intake A 1.5300
intake B 1.5120
exaust 1.5320

auto: intake A 1.5220
intake B 1.5050
exaust 1.5130

i was srong about 87 lude. intake 1.3274 and exaust 1.3359