PDA

View Full Version : Need some assistance please!!



Dizzo7693
05-13-2003, 10:06 PM
Check it out. My car has been giving me these problems for a couple of days.

1.At start off (sometimes) the car it starts to hessitate1K,2K 2.5 it starts to clean out and drives fine.
2.When you try to start the (sometimes) it gives me a hard time. It'll just sit there and crank but won't tun over. Keep doing it still nothing...keep doing it nothing. After a couple of times. After getting a headache with all the gas fumes that I smell, it'll crank over but with a miss firing noise and will clean out after 2.5.
3.ECU trowing a code 13 (Atmosphere pressure sensor) Will this make all this do this?

pimp86LX
05-13-2003, 10:07 PM
how is your carb'd LX throwing you an ecu code? i thought they didn't have a blinky light

Dizzo7693
05-13-2003, 10:08 PM
Thanks

Dizzo7693
05-13-2003, 10:09 PM
It has a 88 lxi conversion on it

anchovies
05-13-2003, 10:30 PM
hows the air cleaner?
did you check the manual (in faq) to find the baro sensor

infecto
05-14-2003, 01:43 AM
Could it be misfiring? Maybe the timing chain even?

ACCORD EX
05-14-2003, 10:36 AM
this sensor could cause that !

MIKE

Dizzo7693
05-14-2003, 10:39 AM
Where would I find this sensor at??? On the 88 LXI or the 86 LX?

cruznz
05-15-2003, 01:49 AM
i dont think the PA sensor will be causing your misfiring problem,,check ignition and components.

Also,the A20A4 in the EXi, the PA sensor was on the ECU,just another thought

ACCORD EX
05-15-2003, 04:07 AM
sorry i thought it was the O2 sensor ! :banghead:

MIKE