How much HP? with this?

[HondaSi88]

1. 89lxi engine
2. Port and Polish job
3 Better injectors
4. Better Pistons
5. Re ground Cam
6. MSD Setup
7. Cam gear
8. Headers,Exhaust, Intake
9. Fuel Pressure reg
10. And whatever timming can be done

I need real numbers what do u guys think?

[duanetc]

about 100hp

[carotman]

with raised compression and ported intake manifold I would say :p :p :p

Honestly, I don't know...

I got around 130 HP as of now (did 85 whp on the dyno with the timing off by 7 degrees)

I got stock internals with header, CAI, mild cam and MSD.

A little wider cam with modded internals... I say at least 160 at the flywheel.. maybe 170

[pric]

Depending on the comp ratio you go to and the size cam you get. With a lot of dyno tunning time you might be able to squeeze out 170-180 hp @ the flywheel maybe. This is also a little on the high side just to many varablies to consider need a little more info on exactly what you plan on doing to the A20A3.

[POS carb]

160-ish

[guaynabo89]

115-120 at the wheels.

[pimping89lxi]

:bandit:

Nah i would push it into the 140-150 range! If you do everything right, 155-160.
But like they said, there are other variables that can vary the numbers.

[A20A1]

d..d..definitly 145 :mad: :D

[GreenMachine]

240 wheel HP .....psssh ...... after the turbo:super:

[smufguy]

400HP at the wheels, oh wait, thats like a second before a blown engine, intake and a flying hood.