PDA

View Full Version : Filters?



Justin86
06-02-2003, 11:30 PM
I'm all most done with my EFI swap and need to know where I can get a ram air filter for my intake. The K&N filter at Autozone is $80. I'm hoping for something around $40 or so. Also I wanted to know if any body has replaced the stock EFI fuel filter with a inline filter like on the carbs. I don't like that tub looking filter on the firewall.

shepherd79
06-03-2003, 03:53 AM
try looking for K&N filter online.
about fuel filter. you have to use this filter. the fuel pressure is bigger so you need to use this filter.

Mike's89AccordLX
06-03-2003, 07:20 AM
So you want a panel filter? Ok how big? (dimensions?) There's a shop in my town that was like $35 and $45 for K&N panel filters. I think one was 5"X10" and the other was 8"X15" (note: those are estimates on the sizes but pretty close to what they are.)

Justin86
06-03-2003, 08:05 AM
Well that is a pretty damn big fuel filter Mike. 5"x10" There wouldn't be enough room to put a battey sized filter in my car.
I know I can get air filters cheaper online but I need it by tomorrow so I have to pick it up. Any stores that sell ok qualitly filters for cheaper then $80.

1988starter
06-03-2003, 08:25 AM
www.ebay.com

Justin86
06-03-2003, 09:20 AM
I would check out ebay but my car should be running by tonight so I would need a filter by the latest tomorrow.

1988starter
06-03-2003, 09:23 AM
you can get an elcheapo apc brand from pepboys for like 25 bucks my priend has one on his tempo no complaints.

Mike's89AccordLX
06-03-2003, 10:57 AM
Ok I thought you were looking to buy a ram air filter and fuel filter. I have one of those pro fuel glass filters for my car. I like it. It was $17

Justin86
06-03-2003, 01:52 PM
Originally posted by Mike's89AccordLX
Ok I thought you were looking to buy a ram air filter and fuel filter. I have one of those pro fuel glass filters for my car. I like it. It was $17
I do want both. I only need the ram air filter though. The fuel filter is ok but I want to see if there is a better filter I could use. Something simular to the filter in the engine bay for the carbs.