B20a Swap

[Janiel]

Wuz up guys. I have a place that can get me B20a's all day long. He wants 750 w/tranny. Does that sound good? They take 35 days to get shipped from japan to my door step. Before i lay the cash down what exacty do i need to drop the motor in and just turn the key? I need to know cause my A20a3 ain't holding on to much longer. I know its hard to get parts for the motor but i work for an auto parts so it won't be so bad.:D

[L3G10N]

it won't be aooo easy

[blazin3gen]

right here homie

http://3geez.com/showthread.php?s=&threadid=90

[Janiel]

Ok So if i use my a20a3 stuff i won't get the 160hp? Ok so when i get the motor i need to ask him for ecm, wire harnness, and rear tranny mount.how much horse power will i lose if i can't get ecm and wire harness? One more question, will i have to chop up all my wire harness? Thanx for the help

[RobT5580]

You will still get around the same HP but remember thats not wheel HP that is rated at the crank. You should read through at least Yasu's (YK86) thread at the top of the forum you will learn a lot and then read through all the B20 threads since all the info is here and been discussed a lot. The only things that you really need are Motor, 5spd tranny, Intermediate shaft, PS pump and the pulleys and you should be all set. The rest can be swapped with other US model parts.