PDA

View Full Version : removing interior parts



stizle
06-05-2003, 03:23 PM
Fopr some odd reason i cannot remove the arm rest on my car. i want to paint them and cant get them off!! any suggestions

shepherd79
06-05-2003, 05:00 PM
to remove the arm rest you will have to remove 4 screws.
two on each side in the front and 2 on the back under the plate.

stizle
06-05-2003, 07:08 PM
two on the back under the plate? What do you mean by under the plate? i'll check it out i dont suppose you can get some pics of that??

stizle
06-05-2003, 07:10 PM
Also how about removing the steering wheel??

easyryder
06-05-2003, 07:26 PM
With a small screwdriver or knife carefully pry the H centre emblem out
Take 19 ml socket unscrew the nut and pull the steering wheel off

DBMaster
06-05-2003, 07:48 PM
Gee, when I removed the steering wheel I removed the Phillips screws on the back of the wheel center to remove the entire plate, horn buttons and all. I never pried out the emblem.

easyryder
06-05-2003, 08:31 PM
DX at the Honda store that is the way we do it Pop the emblem out and see
WWWWWay easier

A20A1
06-05-2003, 09:39 PM
You have to remove the entire door pannel to get the arm rest off... right? Cause the screws are behind it.

stizle
06-06-2003, 11:25 AM
Are the screw behind the door panel. Do i have to take the whole thing off to get the handles off??

ACCORD EX
06-06-2003, 01:38 PM
yes you have too !
( stupid design )

MIKE

stizle
06-06-2003, 04:32 PM
thats fukin gay but gota do what u gotta do!!1