Code 2 i AM AT A LOSS

[1988starter]

Well I got code 2 about a month ago and I replaced both O2 sensors now I am getting it again any ideas what might be setting it off guys.

[BITESIZE]

Does your car get shitty gas mileage or run shitty. If not I wouldn't worry about it.

[88LXi68]

switch the plugs (green to white white to green)

[1988starter]

Originally posted by 88LXi68
switch the plugs (green to white white to green)

Allready did that when I got the header and if I go back it runs like ass

[POS carb]

try putting a ground wire from the body of the sensor to the metal in the engine bay, see if the code goes away

[BITESIZE]

I accidentally got the two o2 sensors switched, that might do it.

[1988starter]

Originally posted by POS carb
try putting a ground wire from the body of the sensor to the metal in the engine bay, see if the code goes away

Ok I will give it a try but why:confused:

[BITESIZE]

Any luck? How does your car run?

[cruznz]

have you tested the sensors?,....wiring,connectors?
just because the ECU is throwing a code,...it may not actually be the sensor itself,...but a part of that particular circuit

[Mike's89AccordLX]

maybe it's your timing starter ;) I know what could settle this problem....... buy my motor and I'll get my swap done :D Or do a A20A1 and swap a fi motor to carbed!!!! :super:

[1988starter]

Originally posted by Mike's89AccordLX
maybe it's your timing starter ;) I know what could settle this problem....... buy my motor and I'll get my swap done :D Or do a A20A1 and swap a fi motor to carbed!!!! :super:

Funny but the only reason yours purrs is because I set youir timing ha ha but any way i fixed it my ajustiable pressure regulator was on the frits so I put the stock one back on and I will try to fix the other.