URGENT!!!!how do u bypass the clutch switch??

[89LXIGUY]

Ok, I 'm still tryin to put my remote start in,but am having problems with the clutch switch(CS). Does ne1 know exactly how to bypass it. NE HELP IS INVALUBLE!!!!

[A Dawg Jr]

buy a different starter????


I dunno

[bobafett]

my car doesnt have to have the clutch in to start. same with ambers car.

they are both 86's though, which may have something to do with it

[SteveDX89]

Yours must be weird. If I don't have the clutch in, the car won't even turn over.

[Justin86]

Maybe it is something with the 89. I have a little sensor on the clutch but it will turn over with out it in, the same with the 87

[A Dawg Jr]

On most, the clutch has to be all the way in for the starter to even engage, I don't know about other years, but at least that's true with the 89's. I have no idea on how to bypass that though, if you figure it out tell me.

[POS carb]

try jumping the 2 wires on the switch

[‹^› ‹(•¿•)› ‹^›]

The switch is only on the 89 models

[89LXIGUY]

Well i found the clutch switch. BOTH OF THEM!! There is one for the cruise control and one for the starter. if you take off the panel right below the steering column, where the tilt is, u can see it in the back. Mine was a yellow 4-prong clip in the cylinder switch like the other one on the clutch and the brake. If u unplug it and run a wire from wire to wire the car will start w/out the clutch in. just make sure ur not in gear. I still can't get the remote start to work though, the manual says that some have to have a bypass and relay for it. Guess ill have to look for some!!

[A Dawg Jr]

Nice work

[89LXIGUY]

I did get the keyless to work neway!