neuspeed exhaust

[tone89LX]

anyone know how much horsepower/torque gain u get from the neuspeed exhaust system for the 89 carburated engine

[A20A1]

I don't think neuspeed makes a cat-back... if you just want the muffler don't expect much more then 2 hp at the higher rpms without having other mods.

[Justin86]

Geez I'm not to sure. Whatever they usally say, cut that in half and that is probably close.

[cdscowboy]

I've also never heard of a Neuspeed exhaust system for our cars. You can get a Pacesetter set-up, but you'll want your own muffler...the P/S one rusts really fast...and I hear the piping isn't the most durable either. Your best bet is to pick out a muffler (on eBay, or your local perfomance shop) and take it to Meineke or any muffler place and have them make a cat-back exhaust set-up and weld your muffler on. As for the size of the piping, 2.25" is the best for your buck, unless you have A LOT of mods, then you may want 2.5"...I'm assuming you don't have much though. Hope that helps!! :)

Oh, and welcome to the board!!!! :wave: :)

[Jims 86LXI HB]

Originally posted by tone89LX
anyone know how much horsepower/torque gain u get from the neuspeed exhaust system for the 89 carburated engine

:huh: Neuspeed does not make a exhaust system for the 86-89 accord. Be real carefull sometimes web site's show parts for 4th gen accords as 8/89 to 93. I think that's the case here.

www.neuspeed.com

Note: I just seached their web site, nothing comes up so it's not like they've added something new to surprise us.

[toastyghost]

Yeah 8/89 is the 90 model year meaning 4th gen.